| Issue |
Title |
File |
| Vol 8, No 2-2 (2014) |
Influence of modes of diamond grinding on cutting forces during machining of structural ceramics |
(Rus)
|
|
Alexeev S.V.
|
| Vol 8, No 2-2 (2014) |
Improvement of cylindrical spur gears wear resistance |
(Rus)
|
|
Gorlenko O.A., Makarov G.N.
|
| Vol 8, No 2-2 (2014) |
Increase of functional reliability of hydraulic actuator of load-lifting devices |
(Rus)
|
|
Bekaev A.A., Maximov Y.V., Strokov P.I., Musakova T.V., Paponov A.V.
|
| Vol 8, No 2-2 (2014) |
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type |
(Rus)
|
|
Vetrova E.A., Lebedev P.A., Adeev A.S.
|
| Vol 8, No 2-2 (2014) |
Comparative studies of air-plasma and oxygen-plasma cutting |
(Rus)
|
|
Vasiliev A.N., Vnuk V.V., Zinoviev V.I., Kotkina T.V.
|
| Vol 8, No 1-2 (2014) |
Flexible technology of forged piston manufacturing in a small-scale production |
(Rus)
|
|
Posedko V.N., Shibaev O.V.
|
| Vol 8, No 1-2 (2014) |
Tribological characteristics of dispersed-filled composite materials |
(Rus)
|
|
Pechnikov A.A., Toleshuli A., Meshcheryakov E.G.
|
| Vol 8, No 1-2 (2014) |
Method of magnetic separation of fluids |
(Rus)
|
|
Samokhin V.V., Sandulyak A.A., Sandulyak A.V.
|
| Vol 8, No 1-2 (2014) |
Development of technological processes of cold forging metal-roll cutting with use of progressive methods of mathematical modeling |
(Rus)
|
|
Mishenko O.B., Fedorina E.V.
|
| Vol 8, No 1-2 (2014) |
Cast composite products with aluminium matrix |
(Rus)
|
|
Pechnikov A.A., Toleshuli A., Meshcheryakov E.G.
|
| Vol 8, No 1-2 (2014) |
75 anniversary of department “Technology of constructional materials” of Moscow State University of Mechanical Engineering (MAMI) |
(Rus)
|
|
Kuznetsov V.A., Shlykova A.V.
|
| Vol 8, No 1-2 (2014) |
Locally reinforced cast composite products with aluminium matrix |
(Rus)
|
|
Pechnikov A.A., Telenkova T.A.
|
| Vol 8, No 1-2 (2014) |
Tangential compensation of torsional vibrations of a workpiece in the technological system of combined cutting-deforming machining |
(Rus)
|
|
Ankin A.V., Chebyshev A.I.
|
| Vol 8, No 1-2 (2014) |
Influence of reinforcing on structure, mechanical and technological properties of composite materials |
(Rus)
|
|
Pechnikov A.A., Toleshuli A., Meshcheryakov E.G.
|
| Vol 8, No 1-2 (2014) |
Punch pressing of solidifying castings of silumins |
(Rus)
|
|
Batyshev A.I., Batyshev K.A., Stancheck L., Smolkin A.A., Shramko T.Y.
|
| Vol 8, No 1-2 (2014) |
Innovations and problems of the course “Science of materials and technology of construction materials” |
(Rus)
|
|
Smolkin A.A., Batyshev A.I., Kuznetsov V.A.
|
| Vol 8, No 1-2 (2014) |
Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part |
(Rus)
|
|
Nikitenko V.M.
|
| Vol 8, No 1-2 (2014) |
Structure and mechanical properties of silumin castings hardened under pressure |
(Rus)
|
|
Stancheck L., Banko B., Batyshev A.I., Batishev K.A.
|
| Vol 8, No 1-2 (2014) |
Piston workpieces produced by casting with crystallization under pressure |
(Rus)
|
|
Batyshev A.I., Batyshev K.A., Smolkin A.A., Bezpalko V.I.
|
| Vol 8, No 1-2 (2014) |
Promising physical and chemical processing of glass by concentrated streams of energy |
(Rus)
|
|
Opalnitskiy A.I., Petrov K.V.
|
| Vol 8, No 1-2 (2014) |
Overview of Russian inventions in field of roll-formed section cutting |
(Rus)
|
|
Zemskova A.N., Kokorin V.N., Filimonov V.I.
|
| Vol 8, No 1-2 (2014) |
Combined tools with plates equipped with STM for processing of stepped bores |
(Rus)
|
|
Grechischnikov V.A., Romanov V.B., Yunusov V.V.
|
| Vol 8, No 1-2 (2014) |
Experimental determination of axial residual stresses in the surface layer of coarse thread root |
(Rus)
|
|
Ovseenko A.N., Klauch D.N., Nosov D.P., Kudinov A.A., Bolotin G.A., Kotov I.V.
|
| Vol 8, No 1-2 (2014) |
Improving the efficiency of assembly technology for fuel injectors of gas-turbine engines by management of functional parameters of spray package parts |
(Rus)
|
|
Semenov A.N., Sazanov A.A.
|
| Vol 8, No 1-2 (2014) |
Industrial experience of industrial development of sheet parts of the nomenclature of “Utes” OJSC in individual production |
(Rus)
|
|
Kultuchkin M.I., Kokorin V.N., Polyakov S.Y.
|
| Vol 8, No 1-2 (2014) |
Principles of selection of cutting technological mediums for metal cutting |
(Rus)
|
|
Kuscheva M.E., Klauch D.N., Kobelev O.A.
|
| Vol 8, No 1-2 (2014) |
Improvement of the technology of cutting modified globoidal gears with localized contact patch |
(Rus)
|
|
Fedotov B.F., Dumilin S.V., Schegolkov N.N., Belyakov V.N.
|
| Vol 8, No 1-2 (2014) |
Management of normative-technical information at mechanical engineering enterprises |
(Rus)
|
|
Krakovtsev V.G., Petrova T.V.
|
| Vol 8, No 1-2 (2014) |
Wear of multifaceted perishable carbide inserts in turning of experimental steel 75ХГСФ |
(Rus)
|
|
Volkov R.B.
|
| Vol 8, No 1-2 (2014) |
Increase in objectivity of selection of part blanks |
(Rus)
|
|
Medvedev O.A.
|
| Vol 8, No 1-2 (2014) |
The method of express-diagnostics of the roughness of the surface layer of machine parts on basis of a probabilistic model with hidden states |
(Rus)
|
|
Palamar I.N., Julin S.S.
|
| Vol 8, No 1-2 (2014) |
Groove machining on automobile parts |
(Rus)
|
|
Grechichnikov V.A., Pivkin P.M.
|
| Vol 8, No 1-2 (2014) |
Analysis of wear and causes of failure of high-speed spindles bearings |
(Rus)
|
|
Reshnyak S.E., Maksimov A.D.
|
| Vol 8, No 1-2 (2014) |
Study of mechanism of structure formation in a process of intensive consolidation of powders using the effect of interparticle splicing |
(Rus)
|
|
Kokorin V.N., Filimonov V.I., Sizov N.A., Kokorin A.V., Bryazgin M.A.
|
| Vol 8, No 1-2 (2014) |
Development of technology of hardening of large punch matrices |
(Rus)
|
|
Serezhkin M.A., Melnikov E.L.
|
| Vol 8, No 1-2 (2014) |
Use of artificial intelligence methods for constructing a mathematical model of a part for further technological design |
(Rus)
|
|
Kordyukov A.V.
|
| Vol 8, No 1-2 (2014) |
Interrelation of wear resistance with quality parameters of the surface layer of parts after machining |
(Rus)
|
|
Sutyagin A.N.
|
| Vol 8, No 1-2 (2014) |
Manufacture and processing of advanced composite materials |
(Rus)
|
|
Hashem M.S.
|
| Vol 8, No 1-2 (2014) |
Deformational snap temper of structural steel |
(Rus)
|
|
Prokhorova A.I., Borisova A.S.
|
| Vol 8, No 1-2 (2014) |
Developing of analytical model for bevel cutting |
(Rus)
|
|
Olenin L.D., Storchak M.G., Lekveischvili M.A.
|
| Vol 8, No 1-2 (2014) |
Improving the efficiency of assembly processes of gas turbine engines rotors, based on simulation technologies |
(Rus)
|
|
Timofeev М.В., Timofeeva Е.В.
|
| Vol 8, No 1-2 (2014) |
Statistical business process management - the key to success of a modern industrial enterprise |
(Rus)
|
|
Loktev D.A.
|
| Vol 8, No 1-2 (2014) |
Improvement of fatigue resistance of parts using technological methods |
(Rus)
|
|
Uryadov S.A.
|
| Vol 8, No 1-2 (2014) |
Improvement of helical surfaces machining |
(Rus)
|
|
Shchavelev P.A., Klepikov V.V., Soldatov V.F.
|
| Vol 8, No 1-2 (2014) |
Development of dynamometer system for measuring cutting forces when turning |
(Rus)
|
|
Bezyazichniy V.F., Kordyukov A.V., Timofeev M.V., Fomenko R.N.
|
| Vol 8, No 1-2 (2014) |
Adaptive optimization of bevel gear repair assembly of automobile transmissions |
(Rus)
|
|
Vinogradov V.M., Cherepakhin A.A.
|
| Vol 8, No 1-2 (2014) |
Modern worm milling cutters - design, tool materials and wear-resistant coatings |
(Rus)
|
|
Loktev D.A.
|
| Vol 8, No 1-2 (2014) |
Ensuring the quality of the surface layer and the reduction of process costs when machining R.N. Akinshin |
(Rus)
|
|
Akinshin R.N.
|
| Vol 8, No 1-2 (2014) |
The dependence of the accuracy of cylindrical toothed gears manufacturing from the precision of their major components and assemblies |
(Rus)
|
|
Vinogradov V.M., Cherepakhin A.A.
|
| Vol 8, No 1-2 (2014) |
Fundamental scientific discovery «Garkunov-Kragelskiy effect of the absence of wear » as an innovative form of intensification of industrial technologies and the development of scientific and educational processes |
(Rus)
|
|
Polyakov A.O., Chikhacheva N.Y.
|
| Vol 8, No 1-2 (2014) |
New effective technologies and materials for production of heavy-duty gearboxes |
(Rus)
|
|
Ovumyan G.G., Klauch D.N., Nosov D.P., Dumilin S.V., Malysheva N.B., Mosyuk A.L.
|
| Vol 8, No 1-2 (2014) |
Determination of the minimum curvature radius of a die for isothermal direct axisymmetric extrusion of aluminum alloy AD35 |
(Rus)
|
|
Voronkov V.I.
|
| Vol 8, No 1-2 (2014) |
Functionally-oriented technologies of working surfaces treatment for automotive parts |
(Rus)
|
|
Suslov A.G.
|
| Vol 8, No 1-2 (2014) |
Study of processing of deep holes and fixing of tubes in parts of heat exchange equipment |
(Rus)
|
|
Yagutkin E.G., Kondratenko L.A., Gunin A.V., Mogutov I.V.
|
| Vol 8, No 1-2 (2014) |
Increase of cutting tool wear resistance by mesh cover coating |
(Rus)
|
|
Chekalova E.A., Chekalov P.D.
|
| Vol 8, No 1-2 (2014) |
Non-wearing friction and hydrogen wear of metals when solving basic tribological problems of mechanisms and machines quality |
(Rus)
|
|
Garkunov D.N., Melnikov E.L.
|
| Vol 8, No 1-2 (2014) |
Influence of the type of wide nomenclature of a machine-building production on the size of unproductive losses of time in the technological and production processes of manufacturing |
(Rus)
|
|
Ryabov A.N.
|
| Vol 8, No 1-2 (2014) |
The integrated logistic support for after-sales service of aviation gas turbine engines and gas-pumping installations |
(Rus)
|
|
Kalugin S.S.
|
| Vol 8, No 1-2 (2014) |
Increase of cutting tool wear resistance by diffusion mesh cover coating |
(Rus)
|
|
Chekalova E.A., Chekalov P.D.
|
| Vol 8, No 4-1 (2014) |
Carbon materials for parts of gas-turbine engines and internal combustion engines, problems and prospects |
(Rus)
|
|
Pyatov I.S., Shiboev O.V., Buzinov V.G., Makarov A.R., Kostyukov A.V., Posedko V.N., Finkelberg L.A., Kostyuchenkov A.N.
|
| Vol 8, No 4-1 (2014) |
Dynamic analysis of parameters of front truck cabin suspension |
(Rus)
|
|
Gorobtsov A.S., Kartsov S.K., Polyakov Y.A., Dyakov A.S.
|
| Vol 8, No 4-1 (2014) |
Study of parametric oscillations of an automobile wheel |
(Rus)
|
|
Shcherbakov V.I.
|
| Vol 8, No 4-1 (2014) |
Application of flap gas-dynamic bearing in turbine-generator units of low power |
(Rus)
|
|
Rumyantsev M.Y., Zakharova N.E., Sigachev S.I.
|
| Vol 8, No 4-1 (2014) |
Optimization of heat exchanger heat transfer surface of the engine with external heat supply |
(Rus)
|
|
Ilyin A.A., Merkulov V.I.
|
| Vol 8, No 4-1 (2014) |
Optimization of the automotive microturbine diffuser output geometry |
(Rus)
|
|
Andreenkov A.A.
|
| Vol 8, No 4-1 (2014) |
Development of supercharging systems for internal combustion engines for variuos purposes |
(Rus)
|
|
Kaminskiy R.V.
|
| Vol 8, No 4-1 (2014) |
The use of coefficient of rotating mass in determining reduced (equivalent) moments of inertia |
(Rus)
|
|
Gusakov D.N.
|
| Vol 8, No 4-1 (2014) |
Overview of the problem of moist air flow in turbo-expanders |
(Rus)
|
|
Martyanov O.A., Merkulov V.I.
|
| Vol 8, No 4-1 (2014) |
Analysis of the results of mathematical modeling of curvilinear motion of three-axle all-wheel drive vehicle with locked interaxle drive |
(Rus)
|
|
Lepeshkin A.V., Katanaev N.T., Medvedev A.S., Simochkin A.V.
|
| Vol 8, No 4-1 (2014) |
Unification of certain terms and concepts used in theories of tractor, automobile, high speed wheeled and tracked transport-traction vehicles |
(Rus)
|
|
Parfenov A.P., Shchetinin Y.S.
|
| Vol 8, No 4-1 (2014) |
Stabilization of gas temperature and rotor speed on test-bench for control and research testing of turbochargers by means of automation |
(Rus)
|
|
Kovaltsov I.V., Kaminskiy R.V., Kaminskiy V.N., Sibiryakov S.V., Korneev S.A., Zaitsev O.G.
|
| Vol 8, No 4-1 (2014) |
Use of energy storage materials as alternative fuel for stationary and transport power stations |
(Rus)
|
|
Kuznetsov V.V., Loik A.V.
|
| Vol 8, No 4-1 (2014) |
Study of the thermal state of urbomachine blades by means of software complex |
(Rus)
|
|
Kovalnogov V.N., Fedorov R.V., Generalov D.A.
|
| Vol 8, No 4-1 (2014) |
Calculation and optimization of weight measuring sensor in motor-truck scales |
(Rus)
|
|
Gavryushin S.S., Nepochatov A.V., Godzikovskiy V.A.
|
| Vol 8, No 4-1 (2014) |
Modern requirements for impeller machines for microturbine energy systems |
(Rus)
|
|
Kostyukov A.V., Datsenko V.V., Sinkevich E.M., Kosoy A.A.
|
| Vol 8, No 4-1 (2014) |
Development of controlled turbo-electric compressor |
(Rus)
|
|
Lazarev A.V., Kaminskiy V.N., Kaminskiy R.V., Sibiryakov S.V., Grigorov I.N., Kostyukov E.A.
|
| Vol 8, No 4-1 (2014) |
Analysis of the study of turbomachine impeller oscillations |
(Rus)
|
|
Seleznev V.G., Ilyinskaya O.I., Pavlov Y.I.
|
| Vol 8, No 4-1 (2014) |
Development of a low-pressure turbocharger with axial turbine for a two-stage turbocharging system |
(Rus)
|
|
Grigorov I.N., Kaminsky V.N., Kaminsky R.V., Sibiryakov S.V., Lazarev A.V., Kostyukov E.A., Shuripa V.A.
|
| Vol 8, No 4-1 (2014) |
Specified target setting for synthesis of algorithms for automatic robust control of technology systems |
(Rus)
|
|
Esakov A.E., Kretov A.V.
|
| Vol 8, No 4-1 (2014) |
Multi-purpose high-performance micro-turbines |
(Rus)
|
|
Kostyukov A.V., Gornovskiy A.S., Kosach L.
|
| Vol 8, No 3-1 (2014) |
Evaluation of fatigue life of thin-walled steel structures of mobile machines with a random complex stress state |
(Rus)
|
|
Gusev A.S., Shcherbakov V.I., Starodubtseva S.A.
|
| Vol 8, No 3-1 (2014) |
Force interaction in cam-roller clutch |
(Rus)
|
|
Strokov A.M.
|
| Vol 8, No 3-1 (2014) |
HIL-simulation as an instrument for elaboration of automotive drivetrains with wheels torques distribution |
(Rus)
|
|
Kulikov I.
|
| Vol 8, No 3-1 (2014) |
Hybrid powerplant with the function of an asymmetric distribution of power flow through inter-wheel differential |
(Rus)
|
|
Dementyev Y.V., Krutashov A.V., Deev O.I.
|
| Vol 8, No 3-1 (2014) |
Development of test bench for research of vehicles with hybrid powertrains |
(Rus)
|
|
Nagaitsev M.V.
|
| Vol 8, No 3-1 (2014) |
Optimization of suspension system of high-speed tracked vehicles |
(Rus)
|
|
Savochkin V.A., Sharipov V.M., Smirnova I.A., Shishanov S.M.
|
| Vol 8, No 3-1 (2014) |
Interconnection of ion current with carbon concentration in fuel and the apparent propagation velocity of flame |
(Rus)
|
|
Shaykin A.P., Ivashin P.V., Galiev I.R.
|
| Vol 8, No 3-1 (2014) |
Evolution of concept art and design concepts in automotive design of the XX century |
(Rus)
|
|
Lepeshkin I.A., Kruglov S.M., Lepeshkin A.V.
|
| Vol 8, No 3-1 (2014) |
Development of external indirect control pressure in pneumatic tires |
(Rus)
|
|
Ivanov A.M., Shadrin S.S., Karpukhin K.E.
|
| Vol 8, No 3-1 (2014) |
Parameters of engine’s electrical starting system with alternative supply sources |
(Rus)
|
|
Maleyev R.A., Mychka N.V., Gulin A.N., Kuznetsova Y.A.
|
| Vol 8, No 3-1 (2014) |
Evaluation of effectiveness of module hybrid power plant when choosing among engines of a specific range of electric power |
(Rus)
|
|
Dementyev Y.V., Krutashov A.V., Deev O.I.
|
| Vol 8, No 3-1 (2014) |
Application of methods to predict the durability of friction pads for automobile clutch |
(Rus)
|
|
Esakov A.E.
|
| Vol 8, No 3-1 (2014) |
Calculation of parameters of engine’s electrical starting system with combined supply source |
(Rus)
|
|
Maleyev R.A., Mychka N.V., Gulin A.N., Kapralova M.A.
|
| Vol 8, No 3-1 (2014) |
Need to control the air pressure in the tires of automobiles depending on the degree of its workload |
(Rus)
|
|
Krasavin P.A., Smirnov A.Y.
|
| Vol 8, No 3-1 (2014) |
Analysis of icing of flow channel in vehicle turbochargers |
(Rus)
|
|
Martyanov O.A., Merkulov V.I.
|
| Vol 8, No 3-1 (2014) |
Similarity formula when machining impellers of centrifugal pumps |
(Rus)
|
|
Kondratiev A.S.
|
| Vol 8, No 3-1 (2014) |
Experimental and calculation method for determining traction properties of automobile tires in operation |
(Rus)
|
|
Shadrin S.S., Ivanov A.M.
|
| Vol 8, No 3-1 (2014) |
Features of air environment protection technology for objects of motor transport complex |
(Rus)
|
|
Mikhaylov V.A., Sharipova N.N.
|
| Vol 8, No 2-1 (2014) |
Assessment of changes in characteristics of clutch unit and linkage during operation of a passenger car |
(Rus)
|
|
Prokopyev M.V., Petunin V.P., Tarazanov S.P.
|
| Vol 8, No 2-1 (2014) |
Development of customer feedback systems in management of quality and reliability of cars during operation |
(Rus)
|
|
Kozlovskiy V.N., Maleev R.A., Polyakova E.V., Korotkov V.I.
|
| Vol 8, No 2-1 (2014) |
Problems of tractor design evolution |
(Rus)
|
|
Shipilevsky G.B.
|
| Vol 8, No 2-1 (2014) |
Single pair gear shifting in tractor gearboxes |
(Rus)
|
|
Alendeyev E.M.
|
| Vol 8, No 2-1 (2014) |
Electric power steering for a car |
(Rus)
|
|
Prokhorov V.A., Devochkin O.V.
|
| Vol 8, No 2-1 (2014) |
Complex of analytical tools for assessment of effectiveness of measures aimed at automobile reliability improvement |
(Rus)
|
|
Kozlovskiy V.N., Maleev R.A., Panyukov D.I., Kudinova L.A.
|
| Vol 8, No 2-1 (2014) |
Use of magnetic materials in electrical machines in vehicles |
(Rus)
|
|
Rozin P.A., Akimov A.V.
|
| Vol 8, No 2-1 (2014) |
History of concept art and design concepts in the transportation design |
(Rus)
|
|
Lepeshkin I.A., Kruglov S.M.
|
| Vol 8, No 2-1 (2014) |
Automated control-test stand for study of automobile and bus generator sets |
(Rus)
|
|
Chernov A.E., Akimov A.V.
|
| Vol 8, No 2-1 (2014) |
Use of composite materials in air conditioning systems in vehicles |
(Rus)
|
|
Nagaytsev R.Y., Merkulov V.I.
|
| Vol 8, No 2-1 (2014) |
Mathematical modeling of piston movement in a cylinder |
(Rus)
|
|
Makarov A.R., Smirnov S.V., Osokin S.V.
|
| Vol 8, No 2-1 (2014) |
Development of common algorithms of control unit for long-haul tractor with hybrid power plant |
(Rus)
|
|
Nagaytsev M.V.
|
| Vol 8, No 2-1 (2014) |
Influence of torque distribution between axles on off-road capability of KamAZ-4350, 5350 and 6350 |
(Rus)
|
|
Komarov V.A., Ostretsov A.V., Kondrashov V.N.
|
| Vol 8, No 2-1 (2014) |
Hardware and software complex for robotic platform control |
(Rus)
|
|
Kondratyev K.L., Kharitonov V.I.
|
| Vol 8, No 2-1 (2014) |
Elimination of power flow break for gear actuation |
(Rus)
|
|
Tverskov B.M.
|
| Vol 8, No 2-1 (2014) |
Estimation of measurement uncertainty in testing vehicles in terms of external and internal noise |
(Rus)
|
|
Zakharov I.P., Zharko Y.G., Sergeyeva A.O.
|
| Vol 8, No 2-1 (2014) |
Design features of automobile LED head lighting |
(Rus)
|
|
Pakhomova E.E., Gorkin V.P., Yakunov D.M.
|
| Vol 8, No 2-1 (2014) |
Strength of polymer composites used in automotive industry |
(Rus)
|
|
Osipov N.L., Pirozhkov V.A., Chabunin I.S.
|
| Vol 8, No 1-1 (2014) |
Method of statistical linearization of nonlinear dynamics in systems of mobile machines |
(Rus)
|
|
Gusev A.S., Shcherbakov V.I., Chukanin Y.P., Starodubtseva S.A.
|
| Vol 8, No 1-1 (2014) |
Improving the dynamic characteristics of the hydraulic drive when braking |
(Rus)
|
|
Gurevich Y.Y., Ivochkin M.Y.
|
| Vol 8, No 1-1 (2014) |
Swirling jets behind vane swirlers in free space and in combustion chamber of a gas-turbine engine |
(Rus)
|
|
Emmil M.V.
|
| Vol 8, No 1-1 (2014) |
Search for ways of joining separate kinds of alternative energy resources in the sphere of long-term application of hydrogen power engineering in domestic transport |
(Rus)
|
|
Fomin V.M., Khripach N.A.
|
| Vol 8, No 1-1 (2014) |
Study of mechanism of influence of internal air flows on overall vehicle aerodynamics |
(Rus)
|
|
Petrov A.P.
|
| Vol 8, No 1-1 (2014) |
Study of the process of heat transfer in mesh matrix of rotary heat exchanger |
(Rus)
|
|
Alekseev R., Kostyukov A.V., Kosach L.A.
|
| Vol 8, No 1-1 (2014) |
Comparative evaluation of automobiles KAMAZ-4350, KAMAZ-43114 and Ural-4320-31 flotation on loose sand |
(Rus)
|
|
Ostretsov A.V., Esakov A.E., Sharipov V.M.
|
| Vol 8, No 1-1 (2014) |
An alternative source of electric energy on automobile: the use of exhaust gas energy |
(Rus)
|
|
Ovsiannikov E.M., Klyukin P.N., Ketsaris A.A., Akimov A.V.
|
| Vol 8, No 1-1 (2014) |
Development of software for detection of road markings |
(Rus)
|
|
Krasavin P.A., Kharitonov V.I., Chernokozov V.V.
|
| Vol 8, No 1-1 (2014) |
Design features of Formula racing cars |
(Rus)
|
|
Pletin D.A.
|
| Vol 8, No 1-1 (2014) |
The study of non-traditional power sources in electrical starting systems of internal combustion engines |
(Rus)
|
|
Maleev R.A., Shmatkov Y.M.
|
| Vol 8, No 1-1 (2014) |
The evolution of aerodynamic characteristics of KAMAZ automobiles |
(Rus)
|
|
Valeev D.H., Karabantsev V.S.
|
| Vol 8, No 1-1 (2014) |
Using of shaping-filters in motion control system of high speed caterpillar machine |
(Rus)
|
|
Derzhanskiy V.B., Taratorkin I.A., Karpov E.K.
|
| Vol 8, No 1-1 (2014) |
Analysis of technologies of processing alternative energy sources in motor fuel |
(Rus)
|
|
Fomin V.M., Apelinskiy D.V.
|
| Vol 8, No 1-1 (2014) |
The influence of the set angle of steered wheels on safety of vehicle in curvilinear motion |
(Rus)
|
|
Krasavin P.A., Nadezhdin V.S.
|
| Vol 8, No 1-1 (2014) |
Construction features of energy-absorbing seats used in the armored and aviation vehicles |
(Rus)
|
|
Kulakov N.A., Gavrilov E.V.
|
| Vol 7, No 1-6 (2013) |
One of the ways to describe scientific terminology in special dictionaries |
(Rus)
|
|
Anokhina T.Y., Zaytseva T.N.
|
| Vol 7, No 1-6 (2013) |
Absenteeists as a political stratum of modern Russian society |
(Rus)
|
|
Abramov A.V., Rybina M.V., Davydova N.P.
|
| Vol 7, No 1-6 (2013) |
Economic transformations of the Perestroika period: 1985-1991's |
(Rus)
|
|
Abramova U.A., Dmitriev A.E.
|
| Vol 7, No 1-6 (2013) |
Analysis of the term from the position of the cognitive approach |
(Rus)
|
|
Zakirova E.S., Shvetsova E.V.
|
| Vol 7, No 1-6 (2013) |
Sources of formation and some of the structural-semantic peculiarities of forming the terms of the automotive industry in the Russian language |
(Rus)
|
|
Anokhina T.Y., Zaytseva T.N., Martirosyan N.V.
|
| Vol 7, No 1-6 (2013) |
Aspects of the status and structure of the special vocabulary in the modern Russian language (ex. terms of mechanical engineering) |
(Rus)
|
|
Isaeva N.V., Zmazneva O.A.
|
| Vol 7, No 1-6 (2013) |
Terminology and terminography as components of the general theory of language for specific purposes (LSP) |
(Rus)
|
|
Zakirova E.S.
|
| Vol 7, No 1-6 (2013) |
Ways and means of overcoming social evil in Russian philosophy |
(Rus)
|
|
Barkova I.N.
|
| Vol 7, No 1-6 (2013) |
Activity approach to the study of organization and management |
(Rus)
|
|
Shabaykin A.Y.
|
| Vol 7, No 1-6 (2013) |
Methodology development of research activity of the stock market U |
(Rus)
|
|
Inozemtseva U.V.
|
| Vol 7, No 1-6 (2013) |
The nature of social and ethnic conflict |
(Rus)
|
|
Chulkova O.O.
|
| Vol 7, No 1-6 (2013) |
Analysis of the level of adaptation of students to the newly formed specialty educational environment of high school |
(Rus)
|
|
Koshevoy O.S., Chirkina M.A., Tumanov A.A.
|
| Vol 7, No 1-6 (2013) |
Problems of qualified specialists training in higher education |
(Rus)
|
|
Lapteva V.A.
|
| Vol 7, No 1-6 (2013) |
Considering of the interest to the kinds of reading in foreign language teaching of undergraduate students in a non-linguistic university |
(Rus)
|
|
Koplyakva E.S.
|
| Vol 7, No 1-6 (2013) |
The formation of national workers' faculties in Soviet Russia |
(Rus)
|
|
Panin E.V.
|
| Vol 7, No 1-6 (2013) |
Improving of the training of technical university graduates in terms of innovative development of economy |
(Rus)
|
|
Kazakova S.A., Meshcheryakova E.V.
|
| Vol 7, No 1-6 (2013) |
Educational-methodical maintenance of "Physical Education" discipline based on multimedia technologies |
(Rus)
|
|
Smolina V.A.
|
| Vol 7, No 1-6 (2013) |
General views of individual physical training and ways of restoration of the human body |
(Rus)
|
|
Semenova M.A., Prusakova V.A.
|
| 901 - 1050 of 2404 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >>
|
