Development of Wireless Communication Systems in the Subterahertz Frequency Range


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The subterahertz and terahertz frequency ranges are promising for the creation of high-speed wireless communication systems because of the possibility to achieve a bandwidth of about several dozen gigahertz, which ensures a high channel capacity. However, rapid attenuation of a signal during its propagation in the atmosphere complicates the operation of communication systems in these ranges. The use of fixed narrow-beam antennas with a high power gain provides a direct surface communication distance of up to a few kilometers. The communication distance limitation can be partially removed by decreasing the frequency down to 200 GHz and narrowing the channel bandwidth down to a few gigahertz. In this paper, we present a radically new approach that was developed to create a wideband (up to one gigahertz) communication channel based on rapid modulation of a centimeter wavelength signal followed by the carrier-frequency multiplication up to 230 GHz without the modulating-signal distortion. This approach was not used in the previous communication systems. The model of a transmit–receive system (200–220 GHz) based on modern semiconductor devices is described in detail. The possibility of digital signal transmission at a speed of up to 1 Gbit/s is experimentally shown. According to calculations, an output power of the transmitter about several hundreds of microwatt is enough for data transmission to a distance of up to 1.5 km with an antenna gain of no less than 50 dB.

作者简介

V. Biryukov

Nizhny Novgorod State Technical University n.a. R.E. Alekseev

Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod

V. Vaks

Nizhny Novgorod State Technical University n.a. R.E. Alekseev; Institute for Physics of Microstructures of the Russian Academy of Sciences

Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod; Nizhny Novgorod

K. Kisilenko

Nizhny Novgorod State Technical University n.a. R.E. Alekseev

Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod

A. Panin

Nizhny Novgorod State Technical University n.a. R.E. Alekseev; Institute for Physics of Microstructures of the Russian Academy of Sciences

Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod; Nizhny Novgorod

S. Pripolzin

Nizhny Novgorod State Technical University n.a. R.E. Alekseev; Institute for Physics of Microstructures of the Russian Academy of Sciences

Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod; Nizhny Novgorod

A. Raevsky

Nizhny Novgorod State Technical University n.a. R.E. Alekseev

编辑信件的主要联系方式.
Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod

V.V. Shcherbakov

Nizhny Novgorod State Technical University n.a. R.E. Alekseev

Email: raevsky@nntu.ru
俄罗斯联邦, Nizhny Novgorod

补充文件

附件文件
动作
1. JATS XML

版权所有 © Springer Science+Business Media, LLC, part of Springer Nature, 2019