Отправить статью по E-mail Resource-Saving Technology for Preparing Nickel Superalloy VZh175 Using Substandard Waste
- Авторы: Min P.G.1, Vadeev V.E.1, Kramer V.V.1
-
Учреждения:
- State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
- Выпуск: Том 60, № 9-10 (2017)
- Страницы: 989-996
- Раздел: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/239389
- DOI: https://doi.org/10.1007/s11015-017-0397-9
- ID: 239389
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
A resource-saving technology is presented for processing up to 100% waste, including substandard material, of wrought alloy VZh175 for turbine disks. The technology has been developed in the scientific-production complex of VIAM and makes it possible the prepare alloy from waste no worse than that produced from fresh charge materials with respect to alloying content, impurities, structure, and mechanical properties. The cost is lower by 20–30% compared with that of alloy melted by industrial technology using 50% standard waste.
Об авторах
P. Min
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Автор, ответственный за переписку.
Email: viamlab3@mail.ru
Россия, Moscow
V. Vadeev
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: viamlab3@mail.ru
Россия, Moscow
V. Kramer
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: viamlab3@mail.ru
Россия, Moscow
Дополнительные файлы
