Мақаланы E-mail арқылы жіберу Resource-Saving Technology for Preparing Nickel Superalloy VZh175 Using Substandard Waste
- Авторлар: Min P.G.1, Vadeev V.E.1, Kramer V.V.1
-
Мекемелер:
- State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
- Шығарылым: Том 60, № 9-10 (2017)
- Беттер: 989-996
- Бөлім: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/239389
- DOI: https://doi.org/10.1007/s11015-017-0397-9
- ID: 239389
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
A resource-saving technology is presented for processing up to 100% waste, including substandard material, of wrought alloy VZh175 for turbine disks. The technology has been developed in the scientific-production complex of VIAM and makes it possible the prepare alloy from waste no worse than that produced from fresh charge materials with respect to alloying content, impurities, structure, and mechanical properties. The cost is lower by 20–30% compared with that of alloy melted by industrial technology using 50% standard waste.
Авторлар туралы
P. Min
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Хат алмасуға жауапты Автор.
Email: viamlab3@mail.ru
Ресей, Moscow
V. Vadeev
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: viamlab3@mail.ru
Ресей, Moscow
V. Kramer
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: viamlab3@mail.ru
Ресей, Moscow
Қосымша файлдар
