Study of thermal-physical properties of porous ceramic insulation products
- Authors: Kocherov Y.1, Agabekova A.2, Ramatullaeva L.1, Mamitova A.1, Medeshev B.3, Razikov R.3, Syrlybekkyzy S.4, Kolesnikov A.1
-
Affiliations:
- South-Kazakhstan University named after M. Auezov
- Khoja Akhmet Yassawi International Kazakh-Turkish University
- Tashkent state transport university
- M.Sh. Yesenov Caspian University of Technology and Engineering
- Issue: Vol 8, No 3 (2025)
- Pages: 96-109
- Section: Articles
- URL: https://ogarev-online.ru/2618-7183/article/view/379646
- DOI: https://doi.org/10.58224/2618-7183-2025-8-3-7
- ID: 379646
Cite item
Full Text
Abstract
About the authors
Ye. Kocherov
South-Kazakhstan University named after M. Auezov
Email: Erkebulan083@mail.ru
ORCID iD: 0009-0003-8257-1981
A. Agabekova
Khoja Akhmet Yassawi International Kazakh-Turkish University
Email: altolkyn.agabekova@ayu.edu.kz
ORCID iD: 0000-0001-5977-6653
L. Ramatullaeva
South-Kazakhstan University named after M. Auezov
Email: ramatullaeva_l@mail.ru
ORCID iD: 0000-0003-1771-9903
A. Mamitova
South-Kazakhstan University named after M. Auezov
Email: a-mamitova@mail.ru
ORCID iD: 0000-0003-2334-145X
B. Medeshev
Tashkent state transport university
Email: baxtiyor_medeshev@tstu.uz
ORCID iD: 0009-0000-9912-7578
R. Razikov
Tashkent state transport university
Email: rozikov_r@bk.ru
ORCID iD: 0009-0003-3994-0630
S. Syrlybekkyzy
M.Sh. Yesenov Caspian University of Technology and Engineering
Email: samal.syrlybekkyzy@yu.edu.kz
ORCID iD: 0000-0002-0260-0611
A. Kolesnikov
South-Kazakhstan University named after M. Auezov
Email: kas164@yandex.kz
ORCID iD: 0000-0002-8060-6234
References
- Kocherov E.N., Kolesnikov A.S., Mamitova A.D. Research of clay raw materials of south Kazakhstan for thermal insulating keramzit production. Environmental Technologies and Engineering for Sustainable Development (ETESD‑2023). I. Tashkent. October 14, 2023. P. 37 – 43.
- Donayev A., Shapalov S., Sapargaliyeva B., Ivakhniyuk G. Studies of waste from the mining and metallurgical industry with determination of its impact on the life of the population. News of the National Academy of Sciences of the Republic of Kazakhstan. Series Geology and Technical Sciences. 2022. (4). P. 55 – 68.
- Nadirov K.S., Zhantasov M.K., Bimbetova G.Z., Sadyrbayeva A.S., Orynbasarov A.K., Sakybayev B.A. The study of the gossypol resin impact on adhesive properties of the intermediate layer of the pipeline three‑layer rust protection coating. International Journal of Adhesion and Adhesives. 2017. 78. P. 195 – 199. doi: 10.1016/j.ijadhadh.2017.07.001
- Sapargaliyeva B.O., Bychkov A.Y., Alferyeva Y.O., Syrlybekkyzy S., Altybaeva Z.K., Nurshakhanova L.K., Seidaliyeva L.K., Suleimenova B.S., Zhidebayeva A.E. et al. Thermodynamic modeling of the formation of the main minerals of cement clinker and zinc fumes in the processing of toxic technogenic waste of the metallurgical industry. Rasayan Journal of Chemistry. 2022. 15 (8). P. 2181 – 2187.
- Zhangabay N., Suleimenov U., Utelbayeva A., Fediuk R., Amran M. Analysis of a stress–strain state of a cylindrical tank wall vertical field joint zone. Buildings. 2022. 12 (9). P. 1445.
- Zhantasov M. K., Bimbetova G. Z., Sadyrbayeva A. S., Orynbasarov A. K., Kutzhanova A. N., Turemuratov R. S., Botabaev N. E., Zhantasova D. Examination of optimal parameters of oxy‑ethylation of fatty acids to produce demulsifiers for deliquefaction in the skimming and oil treatment system. Chemistry Today. 2016. 34 (1). P. 72 – 77.
- Zhangabay N., Baidilla I., Tagybayev A., Anarbayev Y., Kozlov P. Thermophysical indicators of elaborated sandwich cladding constructions with heat‑reflective coverings and air gaps. Case Studies in Construction Materials. 2023. 18. e02161.
- Kocherov Ye.N., Kolesnikov A., Makulbekova G., Mamitova A., Ramatullaeva L., Medeshev B., Kolesnikova O. Investigation of the physico‑chemical and mechanical properties of expanded ceramsite granules made on the basis of coal mining waste. Journal of Composites Science. 2024. 8 (8). 306. doi: 10.3390/jcs8080306
- Akhmatov M.A. Lightweight concrete and reinforced concrete structures on aggregates from stone waste and loose porous rocks. Nalchik. Publishing house Kokov V.M. KBGSHA. 2010. 165 p.
- Mordzich M. M. Technology and physico‑mechanical properties of claydite foam concrete for monolithic and prefabricated construction. Science and Technique. 2019. 18 (4). P. 292 – 302.
- Samokhvalov O.V., Galitskov S.Ya., Fadeev A.S. Analysis of technological limitations for obtaining durable expanded clay. INTERSTROYMEKH‑2014. Proceedings of the International Scientific and Technical Conference. Samara. Samara State Architectural‑Construction University. 2014. P. 156 – 159.
- Rubashkina T.I. Non‑stationary calculation of thermal protection of building envelopes. Modern Technologies. System Analysis. Modeling. 2014. 2 (42). P. 188 – 195.
- Sandan A.S. Study of the kinetics of increase in the strength of concrete from expanded clay concrete mixture by step‑by‑step introduction of heat. Bulletin of the Tuva State University. 2012. 3. P. 24 – 29.
- Roshchupkina I.Yu., Denisov D.Yu. Study of the phase composition of expanded clay based on waste from a mining and processing plant during coal enrichment. Bashkir Chemical Journal. 2010. 17 (2). P. 136 – 139.
- Gorin V.M., Tokareva S.A., Kabanova M.K. High‑strength expanded clay and keramdor for load‑bearing structures and road construction. Construction Materials. Moscow. ZAO SORM. 2010. 1 (661). P. 9 – 11.
- Gorin V.M., Tokareva S.A., Vytchikov Yu.S., Belyakov I.G., Shiyanov L.P. Application of wall stones from sand‑free expanded clay concrete in housing construction. Construction Materials. Moscow. ZAO SORM. 2010. 2 (662). P. 15 – 18.
- Rakhimov R.Z., Rakhimova N.R. Scientific, experimental, technical, economic and technological prerequisites for managing the structure and properties of filled artificial building composite materials. Urban Development. 2011. 3 (13). P. 73 – 79.
- Abdrakhimova E.S., Abdrakhimov V.Z., Kayrakbaev A.K. Innovative directions for the use of waste from the fuel and energy complex in the production of thermal insulation materials. Aktobe. Kazakh‑Russian International University. 2015. 276 p.
- Samokhvalov O.V., Galitskov S. a., Pyshkin A.S., Fadeev A S. On the influence of thermal power and torch length on the strength and weight characteristics of expanded clay. INTERSTROYMEKH‑2014. Proceedings of the International Scientific and Technical Conference. Samara. Samara State Architectural‑Construction University. 2014. P. 101 – 104.
- Maksimov S.V. Wall products. Directions of technology development. Bulletin of UlSTU. 2017. 4. P. 46 – 48.
- Abdrakhimova E.S., Kayrakbaev A.K. Use of waste from the fuel and energy complex in the production of thermal insulation materials based on liquid glass compositions. Aktobe. Kazakh‑Russian International University. 2016. 140 p.
- Sandan A.S. Influence of methods and modes of processing expanded clay concrete on its properties. Industrial and Civil Engineering. Moscow. 2007. 3. P. 53 – 54.
- Makulbekova G.O., Kocherov E.N., Kenzhalieva G.D. Study of sorption moisture and vapor absorption of expanded clay concrete walls. Complaints of the Gyly men Bilіmnіn Hotshysy Republican Magazine. Nur‑Sultan. 2020. 2 (2). P. 165 – 170.
- Karpov D.F. Thermal imaging method for determining humidity fields of building envelope surfaces. Vestnik BSTU im. V. G. Shukhova. 2019. 6. P. 28 – 33.
Supplementary files
