Email this article Development of recommendations for forming numerical models of the working process of axial compressors to calculate, using them, the operational boundaries of a pneumatic brake
- Authors: Prokof'ev A.B.1, Novikova Y.D.1, Matveev V.N.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 10, No 4 (2024): 30.12.2024
- Pages: 109-121
- Section: Articles
- URL: https://ogarev-online.ru/2409-4579/article/view/312332
- DOI: https://doi.org/10.18287/2409-4579-2024-10-4-109-121
- ID: 312332
Cite item
Full Text
Abstract
To determine the operational boundaries of pneumatic brakes based on multistage axial compressors, recommendations have been developed for selecting the configuration and parameter values of the finite element flow mesh in these devices. The proposed recommendations allow for a reduction in the number of mesh elements in models of the compressor's inter-blade channels without decreasing the accuracy of determining the operational boundaries of pneumatic brakes. Testing of the developed recommendations has shown that their application enables more than a twofold reduction in the time required for the gas-dynamic design of pneumatic brakes.
About the authors
Andrey B. Prokof'ev
Samara National Research University
Email: prok@ssau.ru
Doctor of Science (Engineering), Associate Professor, Professor of the Department of Theory of Aircraft Engines named after V. P. Lukachev, First Vice-Rector – Vice-Rector for Research
Russian Federation, SamaraYuliya D. Novikova
Samara National Research University
Author for correspondence.
Email: novikova@ssau.ru
Senior Lecturer of the Department of Theory of Aircraft Engines named after V. P. Lukachev
Russian Federation, SamaraValeriy N. Matveev
Samara National Research University
Email: matveev.vn@ssau.ru
Doctor of Science (Engineering), Professor of the Department of Theory of Aircraft Engines named after V. P. Lukachev
Russian Federation, SamaraReferences
- PJSC UEC-Kuznetsov [Electronic resource]. – URL: https://www.uecrus.com/about/structure/pao-odk-kuznetsov/ (date of access: 01.10.24).
- Standartinform (1991), MI2083–90. Measurements are indirect. Determination of measurement results and estimation of their errors, Moscow. (In Russian)
- Popov, G. M. (2017), “Methods for generating numerical models of the working process of axial uncooled aircraft turbines”, Ph. D. Thesis, Samara, Russia. (In Russian)
- Patankar, S. V. (1980), Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation, 197 p.
- Shabliy, L. S. Samara National Research University named after Academician S. P. Korolev (2013), Programmnoe sredstvo sozdaniya i modifikacii komp'yuternyh modelej lopatok turbomashin Profiler [Profiler software tool for creating and modifying computer models of turbomachinery blades], Russia, Pat. 2013617453.(In Russian)
- Shabliy, L. S., Dmitrieva, I. B. and Popov, G. M. (2012), “Avtomatizaciya postroeniya modeley lopatochnyh vencov dlya CAE raschyotov v programme Profiler” [Automatization of creation vane models for CAE with Profiler], Vestnik Samarskogo gosudarstvennogo aerokosmicheskogo universiteta im. akademika S. P. Korolyova (nacional'nogo issledovatel'skogo universiteta). – № 5(36). – pp. 208-214.
Supplementary files
