REQUIREMENTS FOR THE PARAMETERS OF MICROARC OXIDE COATINGS DEPENDING ON THEIR FIELD OF APPLICATION
- Авторлар: Maksov A.A.1, Pecherskaya E.A.1, Golubkov P.E.1, Melnikov O.A.1, Chuvykin B.V.1, Poteshkin S.A.1
-
Мекемелер:
- Penza State University
- Шығарылым: № 1 (2025)
- Беттер: 70-78
- Бөлім: DEVICES AND METHODS OF MEASURING
- URL: https://ogarev-online.ru/2307-5538/article/view/289582
- DOI: https://doi.org/10.21685/2307-5538-2025-1-9
- ID: 289582
Дәйексөз келтіру
Толық мәтін
Аннотация
Background. Due to the increased interest in the use of oxide coatings in various industries, including medicine and electronics, it is necessary to systematize the known requirements for the quality parameters and operational properties of microarc oxide coatings, depending on their field of application. The aim of the work is to establish the compliance of the quality parameters of microarc oxide coatings with the requirements depending on their field of application. Materials and methods. The requirements for the performance characteristics of high-strength protective coatings obtained by microarc oxidation are analyzed in the context of their application in aerospace engineering, mechanical engineering, and medical devices. Results. Based on the analysis of specific examples of existing applications of microarc oxide coatings, the requirementsfor their operational characteristics have been identified. Examples of multifunctional oxide coatings on aluminum and titanium are considered from the point of view of these requirements, and the expediency of their use in mechanical engineering, the aerospace industry, and medical devices is shown. Conclusions. The results obtained were used in the development of a digital twin of the process of obtaining microarc oxide coatings with specified properties.
Авторлар туралы
Andrey Maksov
Penza State University
Хат алмасуға жауапты Автор.
Email: maksov.01@mail.ru
Master degree student
(40 Krasnaya street, Penza, Russia)Ekaterina Pecherskaya
Penza State University
Email: pea1@list.ru
Doctor of technical sciences, professor, head of the sub-department of information and measuring technology and metrology
(40 Krasnaya street, Penza, Russia)Pavel Golubkov
Penza State University
Email: golpavpnz@yandex.ru
Candidate of technical sciences, associate professor, associate professor of the sub-department of information and measuring technology and metrology
(40 Krasnaya street, Penza, Russia)Oleg Melnikov
Penza State University
Email: oleg-068@mail.ru
Research engineer of the sub-department of information and measuring technology and metrology
(40 Krasnaya street, Penza, Russia)Boris Chuvykin
Penza State University
Email: chuvykin_bv@mail.ru
Doctor of technical sciences, professor, professor of the sub-department of information and computing systems
(40 Krasnaya street, Penza, Russia)Sergey Poteshkin
Penza State University
Email: iit@pnzgu.ru
Postgraduate student
(40 Krasnaya street, Penza, Russia)Әдебиет тізімі
- Buling A., Zerrer J. Increasing the application fields of magnesium by ultraceramic®: Corrosion and wear protection by plasma electrolytical oxidation (PEO) of Mg alloys. Surface & Coatings Technology. 2019;369:142–155. doi: 10.1016/j.surfcoat.2019.04.025
- Pecherskaya E.A., Golubkov P.E., Karpanin O.V. et al. Investigation of the influence of technological parameters of the microarc oxidation process on the properties of oxide coatings. Izvestiya vysshikh uchebnykh zavedeniy. Elektronika = Proceedings of higher educational institutions. Electronics. 2019;24(4):363–369. (In Russ.)
- Golubkov P., Pecherskaya E., Karpanin O. et al. Intelligent automated system of controlled synthesis of mao-coatings. Conference of Open Innovations Association, FRUCT. 2019;(24):96–103.
- Golubkov P.E., Pecherskaya E.A., Martynov A.V. Application of quality control tools for analyzing the microarc oxidation process. Radioelectronics. Problems and prospects of development. Radioelektronika. Problemy i perspektivy razvitiya: tez. dokl. tret'ey Vseros. molodezh. nauch. konf. = Radioelectronics. Problems and prospects of development : thesis of the reports of the third All-Russian youth scientific conference. Tambov, 2018:111–113. (In Russ.)
- Molaei M., Fattah-alhossini A., Nouri M., Nourian A. Systematic optimization of corrosion, bioactivity, and biocompatibility behaviors of calcium-phosphate plasma electrolytic oxidation (PEO) coatings on titanium substrates. Ceramics International. 2022;48(5):6322–6337. doi: 10.1016/j.ceramint.2021.11.175.
- Pecherskaya E.A. Application of the methodology of functional and metrological analysis to the quality of research of micro- and nanoelectronics materials. Fundamental'nye problemy radioelektronnogo priborostroeniya = Fundamental problems of radioelectronic instrumentation. 2007; 7(2):94–98. (In Russ.)
- Maksov A.A., Gurin S.A., Golubkov P.E. et al. Methods and instruments for measuring surface morphology and mechanical parameters of oxide coatings. St. Petersburg State Polytechnical University Journal. Physics and Mathematics. 2024;17(3.1):161–167. doi: 10.18721/JPM.173.132
- Ivanov P.V., Makarova N.I., Bulkina N.V., Zyul'kina L.A. Modern concepts of osseointegration of dental implants. Izvestiya vysshikh uchebnykh zavedeniy. Povolzhskiy region. Meditsinskie nauki = Proceedings of higher educational institutions. The Volga region. Medical sciences. 2018;(4):191–202. (In Russ.). doi: 10.21685/2072-3032-2018-4-19
- Korytkin A.A., Orlinskaya N.Yu., Novikova Ya.S. et al. Biocompatibility and osseointegration of calcium phosphate-coated and non-coated titanium implants with various porosities. Modern technologies in medicine. 2021;13(2):52–58. doi: 10.17691/stm2021.13.2.06
- Atroshchenko E.S., Kazantsev I.A., Rozen A.E., Golovanova N.V. Scope and properties of coatings obtained by microarc oxidation. Fizika i khimiya obrabotki materialov = Physics and chemistry of materials processing. 1996;(3):8–11. (In Russ.)
Қосымша файлдар
