Email this article INCREASING WEAR RESISTANCE OF CYLINDRICAL FRICTION PAIRS BY COMBINED PROCESS WORK
- Authors: Yakovleva A.P.1, Albagachiev A.Y.2, Kulakov O.I.2
-
Affiliations:
- Bauman Moscow State Technical University
- Mechanical Engineering Research Institute of the Russian Academy of Sciences
- Issue: No 1 (139) (2023)
- Pages: 31-37
- Section: Technologies of electromachining and combined processing
- URL: https://ogarev-online.ru/2223-4608/article/view/349891
- DOI: https://doi.org/10.30987/2223-4608-2023-1-31-37
- ID: 349891
Cite item
Full Text
Abstract
The authors have developed a combined processing method for obtaining modified surfaces. A theoretical and experimental study of surface undulation is presented. Comparative wear tests have shown the advantages of the proposed technology in comparison with traditional hardening methods - HFC hardening and electromechanical processing
About the authors
Anna Petrovna Yakovleva
Bauman Moscow State Technical University
Email: yakovleva525@mail.ru
Candidate of Technical Sciences; Assistant Professor of the Department of Manufacturing Technologies
Ali Yusupovich Albagachiev
Mechanical Engineering Research Institute of the Russian Academy of Sciences
Email: Albagachiev@yandex.ru
professor, doctor of technical sciences
Oleg Igorevich Kulakov
Mechanical Engineering Research Institute of the Russian Academy of Sciences
Email: kulakov@imash.ru
ORCID iD: 0000-0003-1716-2180
References
Власов, В.М., Нечаев, Л.М. Работоспособность высокопрочных термодиффузионных покрытий в уз-ах трения машин. - Тула: Приокск. кн. изд-во. -1994. - 235 с. Фундаментальные основы технологического обеспечения и повышения надежности изделий машиностроения / А. Г. Суслов, В. П. Фёдоров, О. А. Горленко [и др.]; под редакцией А. Г. Суслова. - 2022. - 552 с. Сулима, А.М., Шудов, В.А., Ягодкин, Ю.Д. Поверхностный слой и эксплуатационные свойства деталей машин. - М.: Машиностроение. - 1988. - 237 С. Суслов, А.Г. Комплексные исследования качества поверхностного слоя деталей машин // Технологическое управление качеством поверхности деталей: Сб. науч. тр. - Киев. - 1998. - С. 21-27. Суслов, А.Г. Технологическое обеспечение параметров состояния поверхностного слоя деталей. - М: Машиностроение. - 1987. - 208 с. Фадеев, Л.Л., Албагачиев, А.Ю. Повышение надежности деталей машин. М.: Машиностроение. - 1993. - 95 с. Grigor’yants, A.G., Shiganov, I.N. Development of Domestic Equipment for Laser Additive Technologies by Melting Metallic Powders. Russian Metallurgy (Metally), 2020, 2020(6), Р. 649-653 Fedorov, S., Albagachiev, A., Isaenkova, M., Yakovleva, A., Zaripov, V., Minushkin, R. Тhe effect of combined processing schedules on the value and nature of residual stresses in the surface layer of cylindrical friction pairs. В сборнике: IOP Conference Series: Materials Science and Engineering. electronic edition. 2019. С. 012032. Yakovleva, A., Dubov, A., Sobranin, A., Karpovich, E., Marchenkov, A. Тechnological heredity effect on fatigue strength of hydropower plant parts after combined processing. В сборнике: IOP Conference Series: Materials Science and Engineering. The conference «Hy draulics».Bauman Moscow State Technical University. 2020. С. 012029. Fedorov, S.K., Yakovleva, A.P., Perepelkin, Y. K. Controlling the properties of the surface layers of parts by forming regular micro-reliefs. Materials Science Forum. 2020. Т. 989. С. 182-186.
Supplementary files
