Optimization of the choice of liquid phase material in the production of products from fibrous polymer composite materials with two-phase reinforcement scheme
- Autores: Kosenko E.A.1, Baurova N.I.1
-
Afiliações:
- Moscow automobile and road construction state technical university (MADI)
- Edição: Volume 15, Nº 1 (2025)
- Páginas: 57-61
- Seção: Chemistry
- URL: https://ogarev-online.ru/2221-7789/article/view/358111
- ID: 358111
Citar
Texto integral
Resumo
Justification of the choice of the optimal material of the liquid phase of composites with a two- phase reinforcement scheme was carried out on the basis of solving the multi-criteria problem of optimization by methods of ideal point and uniform optimization when used as the main optimization criteria the results of the experimental studies of these materials on the evaluation of tensile and impact strength, as well as losses of these values under conditions of influence of low negative temperatures (–30 and –50 °C).
Sobre autores
Ekaterina Kosenko
Moscow automobile and road construction state technical university (MADI)
Autor responsável pela correspondência
Email: KosenkoKate@mail.ru
Associate Professor, Department of Production and Repair of Road Machines Rússia
Natalia Baurova
Moscow automobile and road construction state technical university (MADI)
Email: KosenkoKate@mail.ru
Russian scientist, doctor of technical sciences. Dean of the Faculty of Road and Technological Machines, Director of the Institute of Automotive and Special Engineering and Engineering. Professor, Department of Production and Repair of Cars and Road Machines Rússia
Arquivos suplementares
