Development of technology for obtaining nanostructured composite powders by high-speed mechanosynthesis

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The results of the development of technology for obtaining nanostructured composite powders in two ways – surface reinforcement and cladding are presented. The possibility of manufacturing functional coatings based on the obtained powders by the method of supersonic cold gas-dynamic spraying is shown. The characteristics of the resulting coatings (adhesive strength, microhardness, wear resistance, low porosity) were studied. The real prospect of using the created functional protective coatings for precision engineering is shown.

About the authors

T. I. Bobkova

NRC “Kurchatov Institute” – CRISM “Prometey”

Author for correspondence.
Email: mail@crism.ru
Cand. Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation

A. F. Vasiliev

NRC “Kurchatov Institute” – CRISM “Prometey”

Email: mail@crism.ru
49 Shpalernaya St, 191015 St Petersburg, Russian Federation

M. E. Goshkoderia

NRC “Kurchatov Institute” – CRISM “Prometey”

Email: mail@crism.ru
49 Shpalernaya St, 191015 St Petersburg, Russian Federation

V. N. Klimov

NRC “Kurchatov Institute” – CRISM “Prometey”

Email: mail@crism.ru
49 Shpalernaya St, 191015 St Petersburg, Russian Federation

V. I. Kubanцев

OJSC VIASM

Email: info@viasm.ru
Dr. Sc. (Eng) 13 St Chekistov, 198206 St Petersburg, Russian Federation

V. I. Margolin

St Petersburg Electrotechnical University (LETI)

Email: info@etu.ru
Dr. Sc. (Eng) 5 St Popova, 197376 St Petersburg, Russian Federation

E. A. Samodelkin

NRC “Kurchatov Institute” – CRISM “Prometey”

Email: mail@crism.ru
49 Shpalernaya St, 191015 St Petersburg, Russian Federation

B. V. Farmakovsky

NRC “Kurchatov Institute” – CRISM “Prometey”

Email: mail@crism.ru
Cand. Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation

I. V. Shakirov

NRC “Kurchatov Institute” – CRISM “Prometey”

Email: mail@crism.ru
49 Shpalernaya St, 191015 St Petersburg, Russian Federation

References

  1. Potapov, A.A., Nauchnye osnovy nanotekhnologii [Scientific foundations of nanotechnology], Nanotekhnika, 2009, No 1, pp. 8-26.
  2. Zhabrev, V.A., Margolin , V.I., Pavelev, V.S., Vvedenie v nanotekhnologiyu (obshchie svedeniya, ponyatiya i opredeleniya) [Introduction to Nanotechnology (general information, concepts and definitions)]: textbook, Sechny, A. I., (Ed.), Samara: State Aerospace University, 2007.
  3. Golovin , Y.I., Vvedenie v nanotekhnologiyu [Introduction to Nanotechnology], Moscow: Mashinostroenie, 2003.
  4. Vvedenie v nanotekhnologiyu [Introduction to Nanotechnology]: textbook, Moscow: Moskovsky Gosudarstvenny institut elektroniki i matematiki, 2007.
  5. Gorynin , I.V., Oryshchenko, A.S., Farmakovsk y, B.V., Kuznet s ov, P.A., Perspektivnye issledovaniya i razrabotki nauchnogo nanotekhnologicheskogo tsentra FGUP TsNIIKM Prometey v oblasti novykh nanomaterialov [Promising research and development of the scientific nanotechnology center of FSUE CRISM “Prometey” in the field of new nanomaterials], Voprosy Materialovedeniya, 2014, No 2(78), pp.118- 128.
  6. Farmakovsk y, B.V., Bobkova , T.I., Metallomatrichnye kompozitsionnye poroshki dlya gazotermicheskogo napyleniya funktsionalno-gradientnykh pokryty s reguliruemoi tverdostyu [Metal matrix composite powders for gas-thermal spraying of functional gradient coatings with adjustable hardness], Proceedings of the 12th Conference “Novye materialy i tekhnologii: poroshkovaya metallurgiya, kompozitsionnye materialy, zashchitnye pokrytiya, svarka”, Institut poroshkovoi metallurgii, Minsk, Belarus, 2016, pp. 188-191.
  7. Gerashchenkov, D.A., Razrabotka tekhnologicheskogo protsessa naneseniya pokrytii metodom kholodnogo gazodinamicheskogo napyleniya na osnove armirovannykh poroshkov sistemy Al-Sn+Al2O3 [Development of the technological process of coating by cold gas-dynamic spraying based on reinforced powders of the Al-Sn+Al2O3 system]: Thesis for Cand. of Sc, St Petersburg, 2015.
  8. Gerashchenkov, D.A., Vasili ev, A.F., Farmakovsk y, B.V., Mashek , A. Ch., Issledovanie temperatury potoka v protsesse kholodnogo gazodinamicheskogo napyleniya funktsionalnykh pokrytii [Investigation of the flow temperature in the process of cold gas-dynamic spraying of functional coatings], Voprosy Materialovedeniya, 2014, No 2(78), pp 103-117.
  9. Margolin , V.I., Potapov, A.A., Farmakovsk y, B.V., Kuznet s o v, P.A., Razvitie nanotekhnologii na osnove nanokompozitov [Development of nanotechnologies based on nanocomposites], St Petersburg: LETI, 2016.
  10. Syrkov, A.G., Nanotekhnologii i nanomaterialy. Poverkhnostno-nanostrukturirovannye metally [Nanotechnology and nanomaterials. Surface-nanostructured metals], St Petersburg: Polytechnic University, 2012.
  11. Gorynin , I.V., Razmyshleniya s optimizmom [Reflections with optimism], St Petersburg: Polytechnic University, 2014.
  12. Alferov, Zh., et al., Perspektivnye napravleniya razvitiya nauki v Peterburge [Promising directions of science development in St Petersburg], St Petersburg: Permyakov, 2015, pp. 137-163.

Supplementary files

Supplementary Files
Action
1. JATS XML

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).