Metrological expertise economic efficiency

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

We discusses the assessment of metrological expertise economic effect, as well as its role for the enterprise. An approach to assessing the economic effect of conducting a metrological expertise has been developed, which takes into account various factors. These are prevented damage, optimization of metrological requirements and additional capital investments. Metrological expertise economic effect is always positive, even if there are no comments or recommendations based on its results. The solution to the problem does not always have an obvious form due to the invisible connection between the implementation of recommendations and the reduction of production costs. We consider it advisable to conduct it for each object for which metrological requirements are established.

Full Text

Restricted Access

About the authors

D. V. Gogolev

State Atomic Energy Corporation Rosatom

Author for correspondence.
Email: DVGogolev@rosatom.ru

PhD (Tech.), Project Manager

Russian Federation, Moscow

T. S. Gogoleva

JSC Atomenergoproekt

Email: t.gogoleva@ase-ec.ru

Director of Standardization and Technical Regulation – Chief Metrologist

Russian Federation, Moscow

References

  1. JCGM 200:2012 International vocabulary of metrology — Basic and general concepts and associated terms (VIM). 3rd ed. 2008 version with minor corrections; https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf/f0e1ad45-d337-bbeb-53a6-15fe649d0ff1 (acc.: 16.04.2024).
  2. OIML V 1 International vocabulary of terms in legal metrology (VIML). Ed. 2013; https://www.oiml.org/en/publications/vocabularies/en/files/pdf_v/v001-ef22.pdf (acc.: 16.04.2024).
  3. OIML V 1 International vocabulary of terms in legal metrology (VIML). Ed. 2000; https://www.oiml.org/en/files/pdf_v/v001-ef00.pdf (acc.: 6.05.2024).
  4. OIML D 16 Principles of assurance of metrological control. Ed. 2011 (E); https://www.oiml.org/en/publications/documents/en/files/pdf_d/d016-e11.pdf (acc.: 6.05.2024).
  5. GOST R 8.820–2013 SSM. Metrological support. Basic provisions.
  6. Concepts of metrological and standardization examination, goals and objectives of examination; https://metrob.ru/html/metrology/metrol-ekspert/zad-ex.html (acc.: 17.04.2024).
  7. Kozlov M.V., Kudeyarov Yu.A., Pan’kov A.N., Zakonodatel’naya i prikladnaya metrologiya, 2017, no. 5(150), pp. 39–44.
  8. Kudeyarov Yu.A., Medovikova N.Ya. Metrological examination of technical documentation: study guide, Moscow, ASMS, 2017, 141 P.
  9. Polyakova O.V., Glavnyy metrolog, 2009, no. 6, pp. 34–40.
  10. Polyakova O.V., Glavnyy metrolog, 2010, no. 2, pp. 41–45.
  11. RIS 29–2013 SSM. Metrology. Basic terms and definitions.
  12. RIS 63–2003 SSM. Ensuring the effectiveness of measurements in process control. Metrological examination of technical documentation.
  13. GOST R 8.1024–2023 SSM. Metrological examination of technical documentation. Basic provisions.
  14. Glushkova O.G., Medovikova N.Ya. Metrological examination of scientific research works, Moscow, VISM, 1988, 51 P.
  15. Gribanov D.D. Economic efficiency of metrological support of products at the stages of their life cycle, Infra-M, 2022, 111 P.
  16. RF Ministry of Industry and Trade Order of 30.07.2015 N 2167 (ed. of 29.05.2017) On approval of the Procedure for conducting mandatory metrological examination of the requirements for measurements, standard samples and measuring instruments contained in draft regulatory legal acts of the Russian Federation (reg. in RF Ministry of Justice 17.11.2015 N 39733).
  17. RIS 92–2009 Metrological examination of draft interstate and national standards.
  18. GOST R 8.1023–2023 SSM. Expert metrologist for metrological examination of technical documentation. General requirements.
  19. GOST R 58971–2020 SSM. Requirements for experts and specialists. Specialist in metrological support of production activities. General requirements.
  20. Information and documents about SVCEM; https://www.vniims.ru/metrological-services/dobrovolnoe-podtverzhdenie-sootvetstviya-tovarov-i-uslug/dobrovol_sert/ (acc.: 2.05.2024).
  21. Explanatory dictionary of the Russian language; https://ozhegov.slovaronline.com (acc.: 17.04.2024).
  22. Denisenko S.A., Ivanov V.Yu., Isaev L.K., Kompetentnost’, 2023, no. 7, pp. 22–27.
  23. Besfamil’naya L.V., Kurnikov I.B. Assessment of the economic efficiency of metrological services, Moscow, Izd-vo standartov, 1982, 111 P.
  24. Golikov Yu.A. Economics of metrological support: study methodical guide, Novosibirsk, SGGA, 2009, 180 P.
  25. Kurnikov I.B. Economic problems of metrology, Moscow, Izd-vo VNIIKI, 1978, 64 P.
  26. Okrepilov V.V., Antokhina Yu.A., Isaev L.K., Chirkov A.P. Economics of metrology: monograph, St. Petersburg, GUAP, 2017, 175 P.
  27. Chirkov A.P., Kompetentnost’, 2023, no. 7, pp. 18–21.
  28. MM 2546–99 SSM. Methods for determining the economic efficiency of metrological work, Moscow, Izd-vo standartov, 1999.
  29. MM 412–86 Guidelines. Methods for determining the economic efficiency of metrological work, Moscow, Izd-vo standartov, 1987.

Supplementary files

Supplementary Files
Action
1. JATS XML
Download

Copyright (c) 2024 АСМС

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).