Application of the complex algorithm for rehabilitation of patients needing a full reconstruction of dentition (clinical case)

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

Introduction. Aim of the study is testing the algorithm of complex clinical, functional and instrumental analysis in the treatment of patients with the need for total restoration of the dentition with manifestations of myofascial pain syndrome.

Material and methods. A system for the rehabilitation of patients with adentia is proposed, in which, when planning occlusion correction, objective examination data for patients obtained using a set of diagnostic methods should be taken into account. Particular attention is paid to assessing the function of the temporomandibular joint and the presence of pathological signs of disorders of maxillofacial muscles.

Results. A clinical case is described a patient who has been diagnosed with a set of indicators of clinical, functional and instrumental analysis obtained using methods of condylography and cephalometry. The results of treatment and rehabilitation measures allowed achieving the optimal distribution of loads on the dentition, while reducing the risk of ceramic chipping and improving oral hygiene. The approach used allowed timely correction of functional and aesthetic disorders.

Conclusions. The algorithm for working with patients who need total restoration of the dentition should include a thorough history taking, clinical functional analysis using condylography methods, model analysis to register and evaluate the static and dynamic ratios of the dentition. As well as performing cephalometric analysis and other manipulations, in accordance with standard criteria for clinical examination. The developed algorithm is anatomically and pathogenetically justified, since it takes into account the entirety of changes and interconnections of the structures of the dentofacial system and other body systems that underlie the clinical manifestations in this category of patients.

About the authors

Fatima K. Dzalaeva

First Moscow State Medical University (Sechenov University)

Author for correspondence.
Email: dzalayevaf1625@bk.ru

PhD, Professor of the Department of prosthodontics

Russian Federation, Moscow

S. O. Chikunov

First Moscow State Medical University (Sechenov University); People's friendship University (RUDN)

Email: dzalayevaf1625@bk.ru
Russian Federation, Moscow

A. S. Utyuzh

First Moscow State Medical University (Sechenov University)

Email: dzalayevaf1625@bk.ru
Russian Federation, Moscow

Z. K. Dzhagaeva

“North Ossetian State Medical Academy” of the Ministry of Health of the Russia

Email: dzalayevaf1625@bk.ru
Russian Federation, Republic of North Ossetia

A. V. Yumashev

First Moscow State Medical University (Sechenov University)

Email: dzalayevaf1625@bk.ru
Russian Federation, Moscow

References

  1. Alimskiy AV, Gus'kov AV, Morozova SI, Peshkov VA, Wagner VD. Optimization of the operating regime of dental medical organizations to improve the availability of dental care to the population. Klinicheskaya stomatologiya. 2015;1(73):60–2. (in Russian)
  2. Kamieva NA, Kausova GK, Ruzuddinov SR. On the issue of the need for dental prosthetics for the elderly. Vestnik Kazahskogo Natsional'nogo meditsinskogo universiteta. 2018;4:41–5.
  3. Semenyuk VM, Ahmetov EM, Fedorov VE, Kachura GP, Akhme-tov SE. The results of the organization, the effectiveness of orthopedic treatment and the quality of dentures (data from a sociological study). Institut stomatologii. 2017;1(74):26–29.
  4. Chikunov SO. A gentle way of prosthetics without preliminary preparation of supporting teeth. Institutt stomatologii. 2012;2:52–53.
  5. Trezubov VN, CHikunov SO, Bulycheva EA, Alpatyeva YuV, Bulycheva DS. Translational modeling of dentitions in a complex clinical picture. Klinicheskaya stomatologiya. 2017;3(83):60–63.
  6. Dolce MC, Aghazadeh-Sanai N, Mohammed S, Fulmer TT. Integrating oral health into the interdisciplinary health sciences curriculum. Dental Clinics of North America. 2014;58:829–843. doi: 10.1016/j.cden.2014.07.002
  7. Chatzopoulos GS, Wolff LF. Symptoms of temporomandibular disorder, self-reported bruxism, and the risk of implant failure: A retrospective analysis. Cranio. 2020;38(1):50–57. doi: 10.1080/08869634.2018.1491097
  8. Saeidi Pour R, Engler ML, Edelhoff D, Prandtner O, Frei S, Liebermann A. A patient-calibrated individual wax-up as an essential tool for planning and creating a patient-oriented treatment concept for pathological tooth wear. International Journal of Esthetic Dentistry. 2018;13(4):476–492.
  9. Gil-Martinez A, Paris-Alemany A, Lopez-de-Uralde-Villanueva I, La Touche R. Management of pain in patients with temporomandibular disorder (TMD): challenges and solutions. Journal of Pain Research. 2018;11:571–587. doi: 10.2147/JPR.S127950
  10. Giacobbo LC, Guimaraes LK, Fornazari IA, Meda EM, Tanaka OM. Achieving Better Function through Combining Orthodontics and Restorative Den-tistry in the Case of Dental Abrasions. Case Reports in Dentistry. 2019;2019:8137585. doi: 10.1155/2019/8137585.

Supplementary files

Supplementary Files
Action
1. JATS XML
2. Fig. 1. Condition of teeth and gums before treatment.

Download (172KB)
3. Fig. 2. Condylogram of patient A.

Download (248KB)
4. Fig. 3. Making models and performing splint therapy.

Download (344KB)
5. Fig. 4. Re-plastering of the lower jaw model in the articulator. The following parameters were used for wax modeling: I dental class, ratio of teeth 1: 2, teeth 16–46, 17–47, II class of dentition closure.

Download (346KB)
6. Fig. 5. Wax modeling. a - trying on a silicone key to transfer the occlusal surface of the teeth to a new wax-up; b - fixing the silicone key on the working model; c - wax modeling of the occlusal surface of the teeth.

Download (204KB)
7. Fig. 6. Making a second set of temporary crowns. a - fitting a template with plastic temporary crowns in the oral cavity; b - models with pre-prepared teeth and pre-made temporary crowns; c - installation of temporary plastic crowns on the template. The canines and second molars of the upper jaw are left without preparation to control the fixation of the template; d - vise from the prepared teeth of the upper jaw.

Download (213KB)
8. Fig. 7. Moving the shape of the occlusal surfaces from the wax-up.

Download (364KB)
9. Fig. 8. Patient A. The final result of treatment.

Download (466KB)

Copyright (c) 2020 Eco-Vector


 


Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».