Composite electrodes based on Li3V2(PO4)3, Li4Ti5O12 and carbon nanotubes: The influence of composition, thickness and surface morphology on electrochemical properties

Мұқаба

Дәйексөз келтіру

Толық мәтін

Аннотация

The influence of the composition, the thickness and the surface morphology of Li3V2(PO4)3 or Li4Ti5O12 based electrode composites with carbon nanomaterial and polyvinylidene fluoride on their electrochemical performance was examined. The thickness and the surface morphology of the electrodes were jointly controlled by rolling with different gaps and monitored using 3D laser microscopy and scanning electron microscopy. Increasing carbon nanomaterial content, the increase in the specific capacity of the electrode due to the non-Faradic component was observed up to the values of the specific capacity seemingly exceeding the theoretical capabilities of Li3V2(PO4)3 or Li4Ti5O12. When rolling the electrode with decreasing gap, we observed that Li3V2(PO4)3-based electrode composites improved their performance in terms of initial specific capacity and resistance to high current loads. As for Li4Ti5O12-based composites we observed the extremum. We concluded that not only the contact of Li4Ti5O12 or Li3V2(PO4)3 with electrolyte, but the three-phase contact of Li4Ti5O12 or Li3V2(PO4)3 with carbon nanomaterial particles and electrolyte as well was important for the electrochemical activity of electrode composites. 

Авторлар туралы

Arseni Ushakov

Saratov State University

ORCID iD: 0000-0003-0495-7750
SPIN-код: 6225-0061
83, Astrakhanskaya St., Saratov, 410012

Kirill Rybakov

Saratov State University

ORCID iD: 0000-0003-4821-2910
SPIN-код: 5334-5760
83, Astrakhanskaya St., Saratov, 410012

Anna Khrykina

Saratov State University

ORCID iD: 0000-0003-1198-0107
SPIN-код: 5258-7703
83, Astrakhanskaya St., Saratov, 410012

Әдебиет тізімі

  1. Zhao B., Ran R., Liu M., Shao Z. A comprehensive review of Li4Ti5O12-based electrodes for lithium-ion batteries: The latest advancements and future perspectives. Materials Science and Engineering: R: Reports, 2015, vol. 98, pp. 1–71. https://doi.org/10.1016/j.mser.2015.10.001
  2. Rui X., Yan Q., Skyllas-Kazacos M., Lim T. M. Li3V2(PO4)3 cathode materials for lithium-ion batteries: A review. J. Power Sources, 2014, vol. 258, pp. 19–38. https://doi.org/10.1016/j.jpowsour.2014.01.126
  3. Ivanishchev A. V., Ushakov A. V., Ivanishcheva I. A., Churikov A. V., Mironov A. V., Fedotov S. S., Khasanova N. R., Antipov E. V. Structural and electrochemical study of fast Li diffusion in Li3V2(PO4)3- based electrode material. Electrochimica Acta, 2017, vol. 230, pp. 479–491. https://doi.org/10.1016/j.electacta.2017.02.009
  4. Ivanishchev A. V., Churikov A. V., Ushakov A. V. Lithium transport processes in electrodes on the basis of Li3V2(PO4)3 by constant current chronopotentiometry, cyclic voltammetry and pulse chronoamperometry. Electrochimica Acta, 2014, vol. 122, pp. 187–196. https://doi.org/10.1016/j.electacta.2013.12.131
  5. Doughty D. H., Roth E. P. A General Discussion of Li Ion Battery Safety. Electrochem. Soc. Interface, 2012, vol. 21, pp. 37–44. https://doi.org/10.1149/2.F03122if
  6. Ushakov A. V., Makhov S. V., Gridina N. A., Ivanishchev A. V., Gamayunova I. M. Rechargeable lithium-ion system based on lithium-vanadium(III) phosphate and lithium titanate and the peculiarity of it functioning. Monatshefte für Chemie – Chemical Monthly, 2019, vol. 150, pp. 499–509. https://doi.org/10.1007/s00706-019-2374-4
  7. Makhov S. V., Ushakov A. V., Ivanishchev A. V., Gridina N. A., Churikov A. V., Gamayunova I. M., Volynskiy V. V., Klyuev V. V. Peculiarities of lithium pentatianate and lithium–vanadium(III) phosphate joint operation in the lithium-accumulating system. Electrochemical Energetics, 2017, vol. 17, no. 2, pp. 99–119 (in Russian). https://doi.org/10.18500/1608-4039-2017-17-2-99-119
  8. Lu M., series ed., Begun F., Frackowiak E., eds. Supercapacitors: Materials, systems, and applications. John Wiley & Sons, 2013. 568 p.
  9. Du Pasquier A., Plitz I., Menocal S., Amatucci G. A comparative study of Li-ion battery, supercapacitor and nonaqueous asymmetric hybrid devices for automotive applications. J. Power Sources, 2003, vol. 115, iss. 1, pp. 171–178. https://doi.org/10.1016/S0378-7753(02)00718-8
  10. Dsoke S., Fuchs B., Gucciardi E., WohlfahrtMehrens M. The importance of the electrode mass ratio in a Li-ion capacitor based on activated carbon and Li4Ti5O12. J. Power Sources, 2015, vol. 282, pp. 385– 393. https://doi.org/10.1016/j.jpowsour.2015.02.079
  11. Rauhala T., Leis J., Kallio T., Vuorilehto K. Lithium-ion capacitors using carbide-derived carbon as the positive electrode – A comparison of cells with graphite and Li4Ti5O12 as the negative electrode. J. Power Sources, 2016, vol. 331, pp. 156–166. https://doi.org/10.1016/j.jpowsour.2016.09.010
  12. Li J., Fleetwood J., Hawley W. B., Kays W. From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing. Chem. Rev., 2022, vol. 122, iss. 1, pp. 903–956. https://doi.org/10.1021/acs.chemrev.1c00565
  13. Rybakov K. Elins_GUI. GitHub, 2022. Available at: https://github.com/rybakov-ks/Elins_GUI (accessed March 15, 2024).

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).