The influence of the microstructure of the SOFC tubular basis on the formation of the film layer of the SSZ electrolyte

Cover Page

Cite item

Full Text

Abstract

The methodology for preparing precursors for the fabrication of the anode-supported tubular substrates from NiO/YSZ composite was developed. The optimal amount of the pore-forming agent to get the well-developed porosity in the supporting anode was determined. The relationship between the fabrication methods of the anodic and electrolytic functional layers in SOFCs was demonstrated.

About the authors

Darya Vasil'evna Oparina

Vyatka State University

ORCID iD: 0009-0009-1853-4434
36 Moskovskaya St.

Zakhar Nikolaevich Ichetovkin

Vyatka State University; Institute of Chemistry of a Solid body and Mechanochemistry of the Siberian Branch of RAS

ORCID iD: 0009-0008-0370-4528
SPIN-code: 6814-2268
36 Moskovskaya St.

Stepan Andreevich Chikishev

Vyatka State University

ORCID iD: 0009-0005-8902-597X
SPIN-code: 6172-6710
36 Moskovskaya St.

Victoria A. Ichetovkina

Vyatka State University

ORCID iD: 0009-0004-2501-5628
SPIN-code: 5290-4040
36 Moskovskaya St.

Olga S. Bervitskaya

Vyatka State University

ORCID iD: 0009-0009-8621-9591
SPIN-code: 5760-2962
36 Moskovskaya St.

Anna Y. Stroeva

Vyatka State University

ORCID iD: 0000-0002-6772-3321
SPIN-code: 9453-1231
36 Moskovskaya St.

Anton Valerievich Kuzmin

Vyatka State University; Institute of Chemistry of a Solid body and Mechanochemistry of the Siberian Branch of RAS

ORCID iD: 0000-0002-0700-662X
SPIN-code: 5450-2156
36 Moskovskaya St.

References

  1. Dziurdzia B., Magonski Z., Jankowski H. Commercialisation of Solid Oxide Fuel Cells – opportunities and forecasts // IOP Conference Series : Materials Science and Engineering. 2015. Vol. 104. Article number 012020. https://doi.org/10.1088/1757-899x/104/1/012020
  2. Агарков Д. А. Изучение взаимосвязи микроструктуры и процессов переноса заряда в композиционных электродах ТОТЭ планарной геометрии : дис. … канд. физ.-мат. наук. Черноголовка, 2016. 171 с.
  3. Osinkin D. A., Antonova E. P., Lesnichyova A. S., Tropin E. S., Chernov M. E., Chernov E. I., Farlenkov A. S., Khodimchuk A. V., Eremin V. A., Kovrova A. I., Kuzmin A. V., Ananyev M. V. Application of promising electrode materials in contact with a thin-layer ZrO2-based supporting electrolyte for solid oxide fuel cells // Energies. 2020. Vol. 13, iss. 5. Article number 1190. https://doi.org/10.3390/en13051190
  4. Добровольский А. Г. Шликерное литье. М. : Металлургия, 1977. 240 с.

Supplementary files

Supplementary Files
Action
1. JATS XML

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).