Abrasive and fretting wear resistance of aluminum alloy specimens manufactured by laser microcladding
- 作者: Tarasova T.V.1, Gvozdeva G.O.1
-
隶属关系:
- Moscow State Technological University STANKIN
- 期: 卷 38, 编号 3 (2017)
- 页面: 231-236
- 栏目: Article
- URL: https://ogarev-online.ru/1068-3666/article/view/228746
- DOI: https://doi.org/10.3103/S106836661703014X
- ID: 228746
如何引用文章
详细
In this article, the results of investigations of abrasive wear resistance and wear under the fretting of the samples obtained by the method of laser microcladding have been presented. The material for sample preparation was powder of Al–Si hypereutectic alloy with the following composition: 70–74 wt % Al and 26–30 wt % Si. The influence of the structure and phase composition of AlSi30 alloy on wear resistance under the conditions of abrasive wear and wear under fretting conditions has been shown.
作者简介
T. Tarasova
Moscow State Technological University STANKIN
编辑信件的主要联系方式.
Email: tarasova952@mail.ru
俄罗斯联邦, Moscow, 127994
G. Gvozdeva
Moscow State Technological University STANKIN
Email: tarasova952@mail.ru
俄罗斯联邦, Moscow, 127994
补充文件
