Impact of plasma hardening on the wear resistance of 38XC steel
- Authors: Korotkov V.A.1
-
Affiliations:
- Nizhny Tagil Affiliate of the Ural Federal University
- Issue: Vol 38, No 4 (2017)
- Pages: 302-304
- Section: Article
- URL: https://ogarev-online.ru/1068-3666/article/view/228797
- DOI: https://doi.org/10.3103/S1068366617040055
- ID: 228797
Cite item
Abstract
The impact of plasma hardening on the wear resistance of 38XC steel was studied. It has been found that the wear resistance increases by 53.7 times under the condition of dry friction compared to the normalized state and by 12.7 times compared to the improved state. During plasma hardening, the wear of 38XC steel under dry friction is equal to the normalized steel 15 with lubrication; and the wear is not increased in case of a 1.5-fold increase in the load. The addition of HADO revitalizant to oil contributed to an approximately twofold decrease in the wear of 38XC steel with plasma hardening during wearing-in after cutting off the lubricant.
Keywords
About the authors
V. A. Korotkov
Nizhny Tagil Affiliate of the Ural Federal University
Author for correspondence.
Email: vk@udgz.ru
Russian Federation, Nizhny Tagil, 622031
Supplementary files
