Email this article Dry friction of pure aluminum against steel
- Authors: Rusin N.M.1, Skorentsev A.L.1,2, Kolubaev E.A.1,2
-
Affiliations:
- Institute of Strength Physics and Materials Science, Siberian Branch
- Tomsk Polytechnic University
- Issue: Vol 37, No 1 (2016)
- Pages: 86-93
- Section: Article
- URL: https://ogarev-online.ru/1068-3666/article/view/228047
- DOI: https://doi.org/10.3103/S1068366616010141
- ID: 228047
Cite item
Open Access
Access granted
Subscription Access
Abstract
The behavior of aluminum during dry friction against a steel disk is studied. It has been found that, in the course of dry friction, severe wear of the surfaces of both materials occurs. With an increase in the applied pressure, the wear intensity of the friction pair grows, while the coefficient of friction decreases. The examination of the structure of the subsurface layers of the aluminum specimens has shown that the deformation that occurs in these layers makes a substantial contribution to the wear of these specimens.
About the authors
N. M. Rusin
Institute of Strength Physics and Materials Science, Siberian Branch
Email: skoralexan@mail.ru
Russian Federation, pr. Akademicheskii 2/4, Tomsk, 634055
A. L. Skorentsev
Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk Polytechnic University
Author for correspondence.
Email: skoralexan@mail.ru
Russian Federation, pr. Akademicheskii 2/4, Tomsk, 634055; pr. Lenina 30, Tomsk, 634050
E. A. Kolubaev
Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk Polytechnic University
Email: skoralexan@mail.ru
Russian Federation, pr. Akademicheskii 2/4, Tomsk, 634055; pr. Lenina 30, Tomsk, 634050
Supplementary files
