Initial stages of misfit stress relaxation through the formation of prismatic dislocation loops in GaN–Ga2O3 composite nanostructures


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The initial stages of misfit stress relaxation through the formation of rectangular prismatic dislocation loops in model composite nanostructures have been considered. The nanostructures are either spherical or cylindrical GaN shells grown on solid or hollow β-Ga2O3 cores or planar thin GaN films on β-Ga2O3 substrates. Three characteristic configurations of prismatic dislocation loops, namely, square loops, loops elongated along the GaN/Ga2O3 interface, and loops elongated along the normal to the GaN/Ga2O3 interface, have been analyzed. The generation of prismatic dislocation loops from the interface into the bulk of the GaN shell (film), from the free surface into the GaN shell (film), and from the interface into the β-Ga2O3 core (substrate) has been investigated. It has been shown that, for the minimum known estimate of the lattice misfit (2.6%) in some of the considered nanostructures, no any prismatic dislocation loops can be generated. If the generation of prismatic dislocation loops is possible, then in all the considered nanostructures, the energetically more favorable case corresponds to prismatic dislocation loops elongated along the GaN/Ga2O3 interfaces, and the more preferred generation of prismatic dislocation loops occurs from the GaN free surface. The GaN/Ga2O3 nanostructures that are the most and least resistant to the formation of prismatic dislocation loops have been determined. It has been found that, among the considered nanostructures, the planar two-layer GaN/Ga2O3 plate is the most resistant to the generation of prismatic dislocation loops, which is explained by the action of an alternative mechanism for the relaxation of misfit stresses due to the bending of the plate. The least resistant nanostructure is the planar three-layer GaN/Ga2O3/GaN plate, in which GaN films have an identical thickness and which itself as a whole does not undergo bending. The critical thicknesses of the GaN shells (films), which must be exceeded to ensure the growth of these shells (films) so as to avoid the formation of prismatic dislocation loops, have been calculated for all the studied nanostructures and three known estimates of the lattice misfits (2.6, 4.7, and 10.1%).

作者简介

A. Smirnov

St. Petersburg National Research University of Information Technologies

Email: m.y.gutkin@gmail.com
俄罗斯联邦, Kronverkskii pr. 49, St. Petersburg, 197101

M. Gutkin

Institute of Problems of Mechanical Engineering; Peter the Great St. Petersburg State Polytechnic University; St. Petersburg National Research University of Information Technologies

编辑信件的主要联系方式.
Email: m.y.gutkin@gmail.com
俄罗斯联邦, Bolshoi pr. 61, St. Petersburg, 199178; Politekhnicheskaya ul. 29, St. Petersburg, 195251; Kronverkskii pr. 49, St. Petersburg, 197101

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2016