Enviar artigo por via de e-mail Ensuring Fatigue Life of Parts During Finish Turning with Cubic Boron Nitride Tools
- Autores: Barandych K.S.1, Vysloukh S.P.1, Antonyuk V.S.1
-
Afiliações:
- National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
- Edição: Volume 40, Nº 3 (2018)
- Páginas: 206-215
- Seção: Investigation of Machining Processes
- URL: https://ogarev-online.ru/1063-4576/article/view/186220
- DOI: https://doi.org/10.3103/S1063457618030085
- ID: 186220
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The paper addresses a relationship between the surface state of a steel 40Kh part upon finish turning with cBN tools and its fatigue life. The authors are the first to put forward a mathematical model that shows the dependence of fatigue life of a machined part on the machining conditions in turning using cBN tools. This study has demonstrated the possibility of finish turning of essential parts that have to work under loading of variable magnitudes and directions.
Palavras-chave
Sobre autores
K. Barandych
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Email: vp@kpi.ua
Ucrânia, prosp. Peremohy 37, Kiev, 03056
S. Vysloukh
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Email: vp@kpi.ua
Ucrânia, prosp. Peremohy 37, Kiev, 03056
V. Antonyuk
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Autor responsável pela correspondência
Email: vp@kpi.ua
Ucrânia, prosp. Peremohy 37, Kiev, 03056
Arquivos suplementares
