Email this article Magnesia Sinter with Flux Based on Magnesium Silicate
- Authors: Ovchinnikova E.V.1, Gorbunov V.B.1, Shapovalov A.N.2, Maistrenko N.A.3, Bersenev I.S.4
-
Affiliations:
- Moscow Institute of Steel and Alloys
- Novotroitsk Branch, Moscow Institute of Steel and Alloys
- Ural Steel
- OOO NPVP TOREX
- Issue: Vol 48, No 1 (2018)
- Pages: 34-38
- Section: Article
- URL: https://ogarev-online.ru/0967-0912/article/view/179946
- DOI: https://doi.org/10.3103/S0967091218010126
- ID: 179946
Cite item
Open Access
Access granted
Subscription Access
Abstract
The experimental production of sinter with the addition of a byproduct of magnesite production— serpentinite–magnesite—is considered. This additive improves the strength of the sinter produced. Recommendations are made regarding the best use of serpentinite–magnesite in the sintering shop at Ural Steel.
About the authors
E. V. Ovchinnikova
Moscow Institute of Steel and Alloys
Email: i.bersenev@torex-npvp.ru
Russian Federation, Moscow
V. B. Gorbunov
Moscow Institute of Steel and Alloys
Email: i.bersenev@torex-npvp.ru
Russian Federation, Moscow
A. N. Shapovalov
Novotroitsk Branch, Moscow Institute of Steel and Alloys
Email: i.bersenev@torex-npvp.ru
Russian Federation, Novotroitsk
N. A. Maistrenko
Ural Steel
Email: i.bersenev@torex-npvp.ru
Russian Federation, Novotroitsk
I. S. Bersenev
OOO NPVP TOREX
Author for correspondence.
Email: i.bersenev@torex-npvp.ru
Russian Federation, Yekaterinburg
Supplementary files
