Email this article Improving the production of steel grinding balls at AO EVRAZ ZSMK
- Authors: Stalinskii D.V.1, Rudyuk A.S.1, Solenyi V.K.1, Yudin A.V.2, Volkov K.V.3, Atkonova O.P.3
-
Affiliations:
- Energostal Ukrainian Scientific Center
- OOO ITTs Rosenergostal
- AO EVRAZ ZSMK
- Issue: Vol 46, No 7 (2016)
- Pages: 525-528
- Section: Article
- URL: https://ogarev-online.ru/0967-0912/article/view/178885
- DOI: https://doi.org/10.3103/S0967091216070135
- ID: 178885
Cite item
Open Access
Access granted
Subscription Access
Abstract
The production of steel grinding balls is improved by reducing the billet temperature before rolling, reducing the number of balls between the flanges of the quenching drum, and limiting the discharge temperature of the balls from the bunker after self-tempering. The macrostructure of the billet must be improved, and proportional increase in length and speed of the quenching drum is required.
About the authors
D. V. Stalinskii
Energostal Ukrainian Scientific Center
Email: ruas@energostal.org.ua
Ukraine, Kharkov
A. S. Rudyuk
Energostal Ukrainian Scientific Center
Author for correspondence.
Email: ruas@energostal.org.ua
Ukraine, Kharkov
V. K. Solenyi
Energostal Ukrainian Scientific Center
Email: ruas@energostal.org.ua
Ukraine, Kharkov
A. V. Yudin
OOO ITTs Rosenergostal
Email: ruas@energostal.org.ua
Russian Federation, Belgorod
K. V. Volkov
AO EVRAZ ZSMK
Email: ruas@energostal.org.ua
Russian Federation, Novokuznetsk
O. P. Atkonova
AO EVRAZ ZSMK
Email: ruas@energostal.org.ua
Russian Federation, Novokuznetsk
Supplementary files
