Email this article Optically Transparent Ceramic (Review)
- Authors: Kachaev A.A.1, Grashchenkov D.V.1, Lebedeva Y.E.1, Solntsev S.S.1, Khasanov O.L.2
-
Affiliations:
- All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
- National Research Tomsk Polytechnic University (NI TPU)
- Issue: Vol 73, No 3-4 (2016)
- Pages: 117-123
- Section: Glass Ceramic Materials
- URL: https://ogarev-online.ru/0361-7610/article/view/244628
- DOI: https://doi.org/10.1007/s10717-016-9838-3
- ID: 244628
Cite item
Open Access
Access granted
Subscription Access
Abstract
The fabrication particularities of optically transparent ceramic materials for different applications are examined. The technologies used for compacting and sintering transparent ceramics are described: cold pressing followed by sintering in different media, hot pressing, hot isostatic pressing, spark plasma sintering, and slip casting.
About the authors
A. A. Kachaev
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Email: yulia.ananieva@gmail.com
Russian Federation, Moscow
D. V. Grashchenkov
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Email: yulia.ananieva@gmail.com
Russian Federation, Moscow
Yu. E. Lebedeva
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Author for correspondence.
Email: yulia.ananieva@gmail.com
Russian Federation, Moscow
S. St. Solntsev
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Email: yulia.ananieva@gmail.com
Russian Federation, Moscow
O. L. Khasanov
National Research Tomsk Polytechnic University (NI TPU)
Email: yulia.ananieva@gmail.com
Russian Federation, Tomsk
Supplementary files
