Email this article 
Synthesis of Niobium η-Carbide Nb3(Fe,Al)3C by Mechanical Alloying in a Liquid Organic Medium
- Authors: Eryomina M.A.1, Lomayeva S.F.1
-
Affiliations:
- Udmurt Federal Research Center, Ural Branch, Russian Academy of Sciences
- Issue: Vol 97, No 5 (2023)
- Pages: 680-684
- Section: СТРОЕНИЕ ВЕЩЕСТВА И КВАНТОВАЯ ХИМИЯ
- Submitted: 15.10.2023
- Published: 01.05.2023
- URL: https://ogarev-online.ru/0044-4537/article/view/136589
- DOI: https://doi.org/10.31857/S0044453723050084
- EDN: https://elibrary.ru/MQNBMP
- ID: 136589
Cite item
Open Access
Access granted
Subscription Access
Abstract
The η-carbide Nb3(Fe,Al)3C phase was synthesized for the first time by mechanical alloying of Nb, Al, and Fe in petroleum ether followed by annealing. The synthesis of carbide occurs due to carbon accumulated from the grinding medium. If mechanical alloying is performed using steel vials and balls, the composites based on η-carbide can be obtained without additional introduction of iron; contaminant iron is involved in the formation of Nb3(Fe,Al)3C.
About the authors
M. A. Eryomina
Udmurt Federal Research Center, Ural Branch, Russian Academy of Sciences
Email: mrere@mail.ru
426067, Izhevsk, Russia
S. F. Lomayeva
Udmurt Federal Research Center, Ural Branch, Russian Academy of Sciences
Author for correspondence.
Email: mrere@mail.ru
426067, Izhevsk, Russia
References
- Chaus A.S., Braèík M., Sahul M., Tittel V. // Metal Sci. Heat Treatment 2020. V. 62. № 7–8. P. 489. https://doi.org/10.1007/s11041-020-00590-5
- Zhan J.M., Bi H.Y., Li M.C. // Sci. China Tech. Sci. 2022. V. 65. P. 169. https://doi.org/10.1007/s11431-021-1865-7
- Malfliet A., Mompiou F., Chassagne F. et al. // Met. Mater. Trans. A. 2011. V. 42. № 3333. https://doi.org/10.1007/s11661-011-0745-5
- Shengda G., Tao S., Rui B. et al. // Rare Metal Mater. Eng. 2018. V. 47. № 7. P. 1986. https://doi.org/10.1016/S1875-5372(18)30169-3
- Kwon Y.J., Yoo J.S., Park S.K. et al. // J. Korean Soc. Heat Treat. 2018. V. 31. № 4. P. 165. https://doi.org/10.12656/jksht.2018.31.4.165
- Eryomina M.A., Lomayeva S.F., Kharanzhevsky E.V. et al. // Proc. Struct. Integrity. 2021. V. 32. P. 284. https://doi.org/10.1016/j.prostr.2021.09.040
- Michalchuk A.A.L., Boldyreva E.V., Belenguer A.M. et al. // Frontiers in Chemistry. 2021. V. 9. № 685789. https://doi.org/10.3389/fchem.2021.685789
- Konstanchuk I.G., Boldyrev V.V., Bokhonov B.B., Ivanov E.Yu. // Russ. J. Phys. Chem. A. 2001. V. 75. № 10. P. 1723.
- Reiffenstein E., Nowotny H., Benesovsky F. // Mh. Chem. 1965. V. 96. № 5. P. 1543. https://doi.org/10.1007/bf00902087
- Eryomina M.A., Lomayeva S.F., Lyalina N.V. et al. // Mater. Tod.: Proc. 2020. V. 25. P. 356. https://doi.org/10.1016/j.matpr.2019.12.089
- Eryomina M.A., Lomayeva S.F., Kharanzhevsky E.V. et al. // Int. J. Refract. Met. Hard Mater. 2022. V. 105. P. 105837. https://doi.org/10.1016/j.ijrmhm.2022.105837
- Shelekhov E.V., Sviridova T.A. // Met. Sci. Heat Treat. 2000. V. 42. P. 309. https://doi.org/10.1007/BF02471306
- Kaneyoshi T., Takahashi T., Motoyama M. // Scr. Metall. Mater. 1993. V. 29. P. 1547.
- Lomayeva S.F. // Phys. Met. Metallogr. 2007. V. 104. № 4. P. 388. https://doi.org/10.1134/S0031918X07100092
- Hellstern E., Schultz L., Bormann R., Lee D. // Appl. Phys. Lett. 1988. V. 53. P. 1399. https://doi.org/10.1063/1.99989
- Paul E., Swartzendruber L.J. // Bull. Alloy Phase Diagr. 1986. V. 7. P. 248.
- Jorda J.L., Flükiger R., Muller J. // J. Less-common Met. 1980. V. 75. P. 227. https://doi.org/10.1016/0022-5088(80)90120-4
- Komjathy S. // J. Less-Common Met.1960. V. 2. P. 466.
Supplementary files
