Structure Formation in the Zones of Joints Obtained by Explosion Welding with Subsequent Rolling of a Five-Layer Titanium-Steel Composite

V. N. Arisova; L. M. Gurevich; A. F. Trudov; A. G. Serov; V. G. Kharlamov

doi:10.1007/s11015-019-00798-8

Structure Formation in the Zones of Joints Obtained by Explosion Welding with Subsequent Rolling of a Five-Layer Titanium-Steel Composite

Autores: Arisova V.N.¹, Gurevich L.M.¹, Trudov A.F.¹, Serov A.G.¹, Kharlamov V.G.¹
Afiliações:
1. Volgograd State Technical University
Edição: Volume 63, Nº 1-2 (2019)
Páginas: 96-104
Seção: Article
URL: https://ogarev-online.ru/0026-0894/article/view/242645
DOI: https://doi.org/10.1007/s11015-019-00798-8
ID: 242645

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

We present the results of investigations of the influence of explosion welding and hot rolling at a temperature of 850 °C on the micromechanical properties, structure, and phase composition of the zones of joints of a five-layer “VT-20 titanium alloy–08Kh18N10T corrosion-resistant steel” composite material.