Email this article Analysis of the Thermal State of a Semifinished Product During Hot Die Forging
- Authors: Kolmogortsev I.V.1, Ledovskikh E.V.1, Osipov S.A.1, Shmakov A.K.1
-
Affiliations:
- Institute of Aviation Engineering and Transport, Irkutsk National Research Technical University
- Issue: Vol 59, No 11-12 (2016)
- Pages: 1157-1162
- Section: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/237737
- DOI: https://doi.org/10.1007/s11015-016-0231-9
- ID: 237737
Cite item
Open Access
Access granted
Subscription Access
Abstract
Results are presented from the use of numerical modeling to perform an empirical assessment of the effect of the initial process parameters in hot die forging (the temperatures to which the deforming tools and semifinished product are heated) on the temperature field in the semifinished product during deformation. A series of numerical experiments is performed on the basis of the finite-elements method, the resulting data are analyzed, and relationships between the parameters are established and explained.
Keywords
About the authors
I. V. Kolmogortsev
Institute of Aviation Engineering and Transport, Irkutsk National Research Technical University
Author for correspondence.
Email: ivk@istu.edu
Russian Federation, Irkutsk
E. V. Ledovskikh
Institute of Aviation Engineering and Transport, Irkutsk National Research Technical University
Email: ivk@istu.edu
Russian Federation, Irkutsk
S. A. Osipov
Institute of Aviation Engineering and Transport, Irkutsk National Research Technical University
Email: ivk@istu.edu
Russian Federation, Irkutsk
A. K. Shmakov
Institute of Aviation Engineering and Transport, Irkutsk National Research Technical University
Email: ivk@istu.edu
Russian Federation, Irkutsk
Supplementary files
