Microstructure and Mechanical Properties of Welds of Al – Mg – Si Alloys After Different Modes of Impulse Friction Stir Welding

S. Yu. Kondrat’ev; Yu. N. Morozova; Yu. A. Golubev; C. Hantelmann; A. A. Naumov; V. G. Mikhailov

doi:10.1007/s11041-018-0213-6

Microstructure and Mechanical Properties of Welds of Al – Mg – Si Alloys After Different Modes of Impulse Friction Stir Welding

Авторы: Kondrat’ev S.Y.¹, Morozova Y.N.¹^,2, Golubev Y.A.¹^,2, Hantelmann C.², Naumov A.A.¹, Mikhailov V.G.¹^,2
Учреждения:
1. St. Petersburg Polytechnic University
2. Brandenburg University of Technology
Выпуск: Том 59, № 11-12 (2018)
Страницы: 697-702
Раздел: Article
URL: https://ogarev-online.ru/0026-0673/article/view/236231
DOI: https://doi.org/10.1007/s11041-018-0213-6
ID: 236231

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Дополнительные файлы
Статистика

Аннотация

Welded joints of aluminum alloy 6082-T6 formed by the method of impulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization.