Отправить статью по E-mail Evaluation of Microstructure and Mechanical Properties of High-Strength Bainitic Cast Iron Using an Electromagnetic Sensor
- Авторы: Kashefi M.1, Nateq M.H.1, Kahrobaee S.2
-
Учреждения:
- Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
- Department of Materials Engineering, Sadjad University of Technology
- Выпуск: Том 59, № 5-6 (2017)
- Страницы: 341-345
- Раздел: Article
- URL: https://ogarev-online.ru/0026-0673/article/view/235745
- DOI: https://doi.org/10.1007/s11041-017-0153-6
- ID: 235745
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
High-strength bainitic cast iron is studied after isothermal hardening at 340°C for from 0.5 to 5 h with the use of a non-destructive eddy-current method for monitoring the microstructure and mechanical properties. Iron microstructure is studied by optical microscopy and x-ray diffraction analysis. Brinell hardness and the impact energy are determined. Correlation is established between electromagnetic sensor signal, microstructure, and mechanical properties. It is shown that induced voltage and normalized impedance may be used for non-destructive monitoring of the production process and cast iron quality.
Об авторах
M. Kashefi
Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
Автор, ответственный за переписку.
Email: m-kashefi@um.ac.ir
Иран, Mashhad
M. Nateq
Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad
Автор, ответственный за переписку.
Email: mh.nateq@gmail.com
Иран, Mashhad
S. Kahrobaee
Department of Materials Engineering, Sadjad University of Technology
Email: mh.nateq@gmail.com
Иран, Mashhad
Дополнительные файлы
