A Three-Point Bending Test Machine for Studying the Thermomechanical Properties of Shape Memory Alloys


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

An experimental test machine for studying of the thermomechanical properties of shape-memory alloys in the temperature range from −130 to +300°C under mechanical stresses of up to 2000 MPa and the maximum bending deformation of a sample of up to 20% is described. The principle of operation of the test machine is based on three-point bending of a sample at a variable temperature and a constant load. The deflection of the sample is measured by an optical displacement transducer, which determines the high accuracy and reliability of the results. The apparatus was tested using samples of the Ni49.8Ti50.2 shape-memory alloy.

Авторлар туралы

V. Kalashnikov

Kotel’nikov Institute of Radio-Engineering and Electronics (IRE)

Хат алмасуға жауапты Автор.
Email: vladimir.kalashnikovS@gmail.com
Ресей, Moscow, 125009

V. Koledov

Kotel’nikov Institute of Radio-Engineering and Electronics (IRE)

Email: vladimir.kalashnikovS@gmail.com
Ресей, Moscow, 125009

D. Kuchin

Kotel’nikov Institute of Radio-Engineering and Electronics (IRE)

Email: vladimir.kalashnikovS@gmail.com
Ресей, Moscow, 125009

A. Petrov

Kotel’nikov Institute of Radio-Engineering and Electronics (IRE)

Email: vladimir.kalashnikovS@gmail.com
Ресей, Moscow, 125009

V. Shavrov

Kotel’nikov Institute of Radio-Engineering and Electronics (IRE)

Email: vladimir.kalashnikovS@gmail.com
Ресей, Moscow, 125009

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Pleiades Publishing, Inc., 2018