Email this article Correction of the Output Parameters of an Electrosurgical Unit for Minimizing Thermal Damage to Tissues
- Authors: Belik D.V.1,2, Kustov I.N.1,2, Belik K.D.1, Shekalov A.V.1
-
Affiliations:
- Siberian Research and Testing Center for Biomedical Engineering
- Scientific Research Institute of Biomedical Engineering, Novosibirsk State Technical University
- Issue: Vol 51, No 4 (2017)
- Pages: 258-261
- Section: Article
- URL: https://ogarev-online.ru/0006-3398/article/view/235153
- DOI: https://doi.org/10.1007/s10527-017-9726-3
- ID: 235153
Cite item
Open Access
Access granted
Subscription Access
Abstract
A method for diminishing electrosurgery-induced thermal damage to biological tissues by correcting the power output is considered. The output power is corrected according to the type of biological tissue and the impedance increment caused by coagulation. The results of a study of biological tissue impedance substantiating the feasibility of this method are presented.
About the authors
D. V. Belik
Siberian Research and Testing Center for Biomedical Engineering; Scientific Research Institute of Biomedical Engineering, Novosibirsk State Technical University
Author for correspondence.
Email: dvbelik@mail.ru
Russian Federation, Novosibirsk; Novosibirsk
I. N. Kustov
Siberian Research and Testing Center for Biomedical Engineering; Scientific Research Institute of Biomedical Engineering, Novosibirsk State Technical University
Email: dvbelik@mail.ru
Russian Federation, Novosibirsk; Novosibirsk
K. D. Belik
Siberian Research and Testing Center for Biomedical Engineering
Email: dvbelik@mail.ru
Russian Federation, Novosibirsk
A. V. Shekalov
Siberian Research and Testing Center for Biomedical Engineering
Email: dvbelik@mail.ru
Russian Federation, Novosibirsk
Supplementary files
