Modeling of the Phase Composition of Refractory and Slag Systems, Optimization of Slag Adjustment, and Stabilization of Secondary Steelmaking Slags


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

A procedure for modeling phase formation in the multicomponent CaO–MgO–Al2O3–SiO2–FeO–Fe2O3 oxide system has been proposed. This procedure can be used to predict the equilibrium phase composition of both the refractory and refractory-slag systems in order to modify the chemical composition of smelter slags, improve the service life of the lining of the metallurgical units, and deliberately provide them with the properties of mineral binders.

Sobre autores

V. Kozlov

Federal State Budgetary Educational Institution of Higher Education, “St. Petersburg State Institute of Technology (Technical University)”

Autor responsável pela correspondência
Email: chemic@yandex.ru
Rússia, St. Petersburg

A. Shevchik

Federal State Budgetary Educational Institution of Higher Education, “St. Petersburg State Institute of Technology (Technical University)”

Email: chemic@yandex.ru
Rússia, St. Petersburg

S. Suvorov

Federal State Budgetary Educational Institution of Higher Education, “St. Petersburg State Institute of Technology (Technical University)”

Email: chemic@yandex.ru
Rússia, St. Petersburg

N. Arbuzova

Federal State Budgetary Educational Institution of Higher Education, “St. Petersburg State Institute of Technology (Technical University)”

Email: chemic@yandex.ru
Rússia, St. Petersburg

D. Kuznetsov

Federal State Autonomous Educational Institution of Higher Education, “National Research Technological University “MISiS”

Email: chemic@yandex.ru
Rússia, Moscow

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Springer Science+Business Media, LLC, part of Springer Nature, 2019