Enviar artigo por via de e-mail On the wear rate of an Sn11Sb5.5Cu Babbitt
- Autores: Valeeva A.K.1, Valeev I.S.1, Fazlyakhmetov R.F.1
-
Afiliações:
- Institute for Metals Superplasticity Problems
- Edição: Volume 38, Nº 1 (2017)
- Páginas: 53-57
- Seção: Article
- URL: https://ogarev-online.ru/1068-3666/article/view/228594
- DOI: https://doi.org/10.3103/S1068366617010093
- ID: 228594
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The microstructure of β-phase of Sn11Sb5.5Cu Babbitt produced by casting and liquid forging has been analyzed by optical and scanning electron microscopy using EBSD analysis. It has been established that a significant decrease in the wear rate of Babbitt produced by liquid forging is caused by generation of fine grain structure in the particles of the β phase.
Palavras-chave
Sobre autores
A. Valeeva
Institute for Metals Superplasticity Problems
Autor responsável pela correspondência
Email: valeevs@mail.ru
Rússia, ul. Stepana Khalturina 39, Bashkortostan, Ufa, 450001
I. Valeev
Institute for Metals Superplasticity Problems
Email: valeevs@mail.ru
Rússia, ul. Stepana Khalturina 39, Bashkortostan, Ufa, 450001
R. Fazlyakhmetov
Institute for Metals Superplasticity Problems
Email: valeevs@mail.ru
Rússia, ul. Stepana Khalturina 39, Bashkortostan, Ufa, 450001
Arquivos suplementares
