Fracture as a wear mechanism of ceramics based on a partially stabilized zirconia during dry friction against steel


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The results of wear of four ceramic materials made of a partially stabilized zirconia (Y-TZP, YPCZ, Ce-TZP and Mg-PSZ) during friction against steel without lubrication are presented. It is shown that wear of ceramics from Y-TZP, Y-PSZ, and Ce-TZP occurs in two stages: first it’s a tear fracture and then it’s a shear fracture. The ceramics based on Mg-PSZ wears out by only the mechanism of shear fracture. Proceeding from the analysis, it was concluded that the wear mechanism of the ceramics under study depends on the grain boundary strength.

Sobre autores

G. Akimov

Donetsk Institute for Physics and Engineering named after O.O.Galkin

Autor responsável pela correspondência
Email: gencer47@mail.ru
Ucrânia, Nauky Av. 46, Kiev, 036880

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2016