Email this article Procedure to Determine Friction Torque in a Mechanical Membrane Contact Seal
- Authors: Balyakin V.B.1, Lavrin V.B.1, Ossiala V.B.1
-
Affiliations:
- Korolev National Research University
- Issue: Vol 40, No 1 (2019)
- Pages: 46-50
- Section: Article
- URL: https://ogarev-online.ru/1068-3666/article/view/229248
- DOI: https://doi.org/10.3103/S1068366619010021
- ID: 229248
Cite item
Open Access
Access granted
Subscription Access
Abstract
The main types of available mechanical seals are considered briefly. The operating conditions of a membrane contact mechanical seal with a stationary secondary seal are analyzed. The design procedure of friction torque of the seal under consideration is presented for the example of a pumping unit feeding the fuel components of the steering assembly of LRE.
About the authors
V. B. Balyakin
Korolev National Research University
Author for correspondence.
Email: 029-029@mail.ru
Russian Federation, Samara, 443086
V. B. Lavrin
Korolev National Research University
Email: 029-029@mail.ru
Russian Federation, Samara, 443086
V. B. A. Ossiala
Korolev National Research University
Email: 029-029@mail.ru
Russian Federation, Samara, 443086
Supplementary files
