| Issue |
Section |
Title |
File |
| Vol 37, No 1 (2016) |
Article |
Tribological characteristics of hip joint endoprostheses |
|
| Vol 37, No 1 (2016) |
Article |
Surface modification of diamond-like carbon coatings to control over run-in processes in friction pair |
|
| Vol 37, No 1 (2016) |
Article |
Tribochemical processes in epoxyorganic textolite–steel friction pair |
|
| Vol 37, No 1 (2016) |
Article |
The interrelation of the run-in ability of bronzes and aluminum-based antifriction alloys with their mechanical properties and degree of alloying |
|
| Vol 37, No 1 (2016) |
Article |
Formation of wear-resistant nanostructured TiN/Cu coatings |
|
| Vol 37, No 1 (2016) |
Article |
Statistical description of formation of microgeometry on the friction surface of a diamond drill |
|
| Vol 37, No 1 (2016) |
Article |
Simulation of the thermal process and friction diagnostics in a system of nonlubricated sliding bearings on a common shaft |
|
| Vol 37, No 1 (2016) |
Article |
Determination of the efficiency of high-entropy cutting tool materials |
|
| Vol 37, No 1 (2016) |
Article |
Mechanisms of wear of elastomers under direct impact of abrasive particles |
|
| Vol 37, No 1 (2016) |
Article |
A grinding force model allowing for dulling of abrasive wheel cutting grains in plunge cylindrical grinding |
|
| Vol 37, No 1 (2016) |
Article |
The effect of electric-spark treatment on the structure and properties of modified friction surfaces |
|
| Vol 37, No 1 (2016) |
Article |
Evaluation of the strength, wear, and durability of a corrected cylindrical involute gearing, with due regard for the tooth engagement conditions |
|
| Vol 37, No 1 (2016) |
Article |
Features of interaction of traction wheels of an electric locomotive and a diesel locomotive with rails in the conditions of open mountain works |
|
| Vol 37, No 1 (2016) |
Article |
Performance characteristics and wear pattern of precision parts of cotton tractor hydraulics |
|
| Vol 37, No 1 (2016) |
Article |
Dry friction of pure aluminum against steel |
|
| Vol 37, No 1 (2016) |
Article |
Modeling of abrasive wear by the meshless smoothed particle hydrodynamics method |
|
| Vol 37, No 2 (2016) |
Article |
Study of stress state of viscoelastic half-space in sliding contact with smooth indenter |
|
| Vol 37, No 2 (2016) |
Article |
Effect of convective cooling on temperature and thermal stresses in disk during repeated intermittent braking |
|
| Vol 37, No 2 (2016) |
Article |
Evaluation of the parameters of wear law for heat-exchange tube–spacer grid pair of steam generator of REST-OD-300 nuclear reactor plant operating in argon atmosphere |
|
| Vol 37, No 2 (2016) |
Article |
Experimental study of the balls and raceways contact geometry effect on the rolling-friction torque |
|
| Vol 37, No 2 (2016) |
Article |
Method of evaluating the coefficient of friction of frost-resistant sealing rubbers |
|
| Vol 37, No 2 (2016) |
Article |
Spectroscopic study of tribooxidation processes in modified PTFE |
|
| Vol 37, No 2 (2016) |
Article |
Lubricity of cholesteric liquid-crystal nanomaterials in friction of solids |
|
| Vol 37, No 2 (2016) |
Article |
Composition consisting of lubricating oil, alumina nanopowder, and surfactant for reducing friction in rolling bearings |
|
| Vol 37, No 2 (2016) |
Article |
Method of determining the lubricating and antifriction characteristics of oils based on estimating their rheological characteristics under nonstationary conditions of lubrication |
|
| Vol 37, No 2 (2016) |
Article |
The effect of various metallic filling materials on the wear resistance of aromatic-polyamide-based composite materials |
|
| Vol 37, No 2 (2016) |
Article |
Complex approach to the tribotechnical processing of elements for automobile and tractor engines |
|
| Vol 37, No 2 (2016) |
Article |
Analysis of a steel disk surface running in tandem with the metal–ceramic friction material MK-5 under the conditions of boundary friction of a hydromechanical transmission |
|
| Vol 37, No 2 (2016) |
Article |
Wear of friction pairs made of titanium carbide-based metal–ceramic material |
|
| Vol 37, No 2 (2016) |
Article |
Effect of alloying additives on impact-abrasive wear of manual arc welded hadfield steel hardfacings |
|
| Vol 37, No 2 (2016) |
Article |
Influence of the surface layer structure on the interaction character of friction pairs formed by X155CrMo12-1, 41Gr4, and 35GrMnSi4 steels with CuAl9Fe4 bronze |
|
| Vol 37, No 2 (2016) |
Article |
Friction machine for testing materials under boundary lubrication |
|
| Vol 37, No 2 (2016) |
Article |
The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel–Bronze tribological system |
|
| Vol 37, No 3 (2016) |
Article |
Mathematical modeling of individual asperity sliding on the elastic-plastic half space |
|
| Vol 37, No 3 (2016) |
Article |
Computer simulation of the contact of rough surfaces |
|
| Vol 37, No 3 (2016) |
Article |
Elastohydrodynamic problem for journal sliding bearing under reciprocating motion |
|
| Vol 37, No 3 (2016) |
Article |
Dynamic and quasi-static instability of sliding thermoelastic frictional contact |
|
| Vol 37, No 3 (2016) |
Article |
Electroelastic model of dry friction: Macroscopic approach |
|
| Vol 37, No 3 (2016) |
Article |
Providing the stability of the coefficient of friction of a vehicle disk brake under extreme operating conditions |
|
| Vol 37, No 3 (2016) |
Article |
Kinetics of damage accumulation in pearlitic rail steels under contact fatigue |
|
| Vol 37, No 3 (2016) |
Article |
Kinetics of formation of boundary lubricating film in zone of facing–tool contact under metal cutting |
|
| Vol 37, No 3 (2016) |
Article |
Electrical and tribological properties of composite material with copper matrix reinforced by superelastic hard carbon |
|
| Vol 37, No 3 (2016) |
Article |
Friction and wear of organoplastics based on aromatic polyamide of phenylone type |
|
| Vol 37, No 3 (2016) |
Article |
Comparative friction characteristics of high-entropy mononitride coatings |
|
| Vol 37, No 3 (2016) |
Article |
Fretting wear of composite ceramic coating produced on D16 aluminum-based alloy using microarc oxidation |
|
| Vol 37, No 3 (2016) |
Article |
Effect of hydrogen heat treatment on antifriction properties of nitrided VT6 titanium-based alloy |
|
| Vol 37, No 3 (2016) |
Article |
Tribological studies of thin diamond-like films synthesized using high-speed plasma jet |
|
| Vol 37, No 3 (2016) |
Article |
Tribological behavior of TiN films depositid by reactive magnetron sputtering under low pressure |
|
| Vol 37, No 3 (2016) |
Article |
Evaluating condition of gear oils based on dynamic characteristics of friction |
|
| Vol 37, No 3 (2016) |
Article |
Mechanisms of friction of bicomponent coatings of thermodynamically incompatible metals produced using vapor condensation on cryogenic surfaces |
|
| Vol 37, No 4 (2016) |
Article |
Modeling contact of indenter with elastic half-space with adhesive attraction assigned in arbitrary form |
|
| Vol 37, No 4 (2016) |
Article |
Intelligent method for monitoring the state of lubricating oil |
|
| Vol 37, No 4 (2016) |
Article |
Distribution of friction tangential stresses in the Courtney-Pratt experiment under Bowden’s theory |
|
| Vol 37, No 4 (2016) |
Article |
Effect of ratio of hardnesses, load, and roughness parameters on approach in elastoplastic contact of rough surfaces of flat parts |
|
| Vol 37, No 4 (2016) |
Article |
Self-setting of forces of friction during cross rolling |
|
| Vol 37, No 4 (2016) |
Article |
Computer simulation of the friction of rough surfaces |
|
| Vol 37, No 4 (2016) |
Article |
Tribochemical transformations of glycerol |
|
| Vol 37, No 4 (2016) |
Article |
Experimental study of wear of model friction pairs lubricated with contaminated oil |
|
| Vol 37, No 4 (2016) |
Article |
Effect of chemical structure of aramide and polyoxadiazole fibers on friction of organoplastics |
|
| Vol 37, No 4 (2016) |
Article |
Study of the influence of the friction clutch operability on the performance of the switch motor |
|
| Vol 37, No 4 (2016) |
Article |
Wear resistance of cast Fe–Cr–C steels with various combinations of structural constituents at high velocities of sliding |
|
| Vol 37, No 4 (2016) |
Article |
Effect of conditions of diamond grinding on tribological behavior of alumina-based ceramics |
|
| Vol 37, No 4 (2016) |
Article |
The role of structure formation in forming the physicomechanical properties of composites of the diamond–(Fe–Cu–Ni–Sn) system |
|
| Vol 37, No 4 (2016) |
Article |
Wear resistance of electrospark WC–Cо coatings with different iron contents |
|
| Vol 37, No 4 (2016) |
Article |
Predicting the propagation of damage in roller bearings of aircraft engines by vibration analysis |
|
| Vol 37, No 4 (2016) |
Article |
Dаmреr with а pоrоus element fоr bearing arrangements |
|
| Vol 37, No 4 (2016) |
Article |
Simulations of the working contact loads of a tillage element |
|
| Vol 37, No 5 (2016) |
Article |
Effect of active gas mixture composition on tribological behavior of coatings obtained by reactive magnetron sputtering of chromium in acetylene–nitrogen and acetylene–air gas mixtures |
|
| Vol 37, No 5 (2016) |
Article |
Wear of diamond dressing tools at vibromechanical type of dressing abrasive discs |
|
| Vol 37, No 5 (2016) |
Article |
Fracture as a wear mechanism of ceramics based on a partially stabilized zirconia during dry friction against steel |
|
| Vol 37, No 5 (2016) |
Article |
Minimization of abrasive wear for the internal surface of the hub of a friction pair |
|
| Vol 37, No 5 (2016) |
Article |
The effect of lubricants on tribological characteristics of fibrous materials |
|
| Vol 37, No 5 (2016) |
Article |
Tribochemical processes in engine oil with copper nanoparticles and azomethine ligand |
|
| Vol 37, No 5 (2016) |
Article |
Improving the efficiency of lubricants by introducing friction modifiers for tracked vehicles under stationary conditions of friction |
|
| Vol 37, No 5 (2016) |
Article |
Tribological properties of combined molybdenum coatings formed by electric-spark alloying on stainless steel |
|
| Vol 37, No 5 (2016) |
Article |
Tribological characteristics of composite coatings formed by laser cladding of powders of nickel self-fluxing alloy and bronze |
|
| Vol 37, No 5 (2016) |
Article |
Provision of the required wear resistance criteria of heavy-duty gas turbine engine parts based on the control of the cutting conditions |
|
| Vol 37, No 5 (2016) |
Article |
The complex express evaluation of tribotechnical properties of antifriction aluminum alloys by sclerometric tests |
|
| Vol 37, No 5 (2016) |
Article |
The effect of the coefficient of journal friction in ball-and-socket bogie body pivots on the work done by friction forces in curvilinear motion |
|
| Vol 37, No 5 (2016) |
Article |
Tribological characteristics of low-voltage sliding electrical contacts of gold alloys |
|
| Vol 37, No 5 (2016) |
Article |
Estimating stresses and movement work of a soil-cultivator tip using the finite-element method |
|
| Vol 37, No 5 (2016) |
Article |
Energy-mechanical concept of the durability prediction of friction units on the wear resistance criterion of elements |
|
| Vol 37, No 5 (2016) |
Article |
Formation of regular roughness on working surfaces of friction units |
|
| Vol 37, No 5 (2016) |
Article |
Metal–polymer tribosystems: Basic recommendations for creating composites |
|
| Vol 37, No 6 (2016) |
Article |
Tribology: Trends in the half-century development |
|
| Vol 37, No 6 (2016) |
Article |
Calculation of friction for indenter with fractal roughness that slides against a viscoelastic foundation: Improved model |
|
| Vol 37, No 6 (2016) |
Article |
Ion beam processing of austenite steels: Tribotechnical and corrosion properties |
|
| Vol 37, No 6 (2016) |
Article |
Increase in the coefficient of friction of the rolling stock disc brake via fluid cooling of its friction elements |
|
| Vol 37, No 6 (2016) |
Article |
Studying the properties and structure of polytetrafluoroethylene filled with Belum modified carbon fibers |
|
| Vol 37, No 6 (2016) |
Article |
Study on tribological properties of the DV–FV polyarylate system |
|
| Vol 37, No 6 (2016) |
Article |
Biotribological properties of dentures lubricated with artificial saliva |
|
| Vol 37, No 6 (2016) |
Article |
Effect of fatty-acid composition and structure of alkyl radicals of plant oil triglycerides on their tribotechnical characteristics |
|
| Vol 38, No 1 (2017) |
Article |
Tribotechnical properties of thin-film coatings obtained by the tribomodifcation of crankshaft pins for ship diesel engines |
|
| Vol 38, No 1 (2017) |
Article |
Study of the influence of ring misalignment in rolling bearings on frictional torque and the fatigue life of supports |
|
| Vol 38, No 1 (2017) |
Article |
Increasing the wear resistance of reworked parts of transport engines |
|
| Vol 38, No 1 (2017) |
Article |
Wear of inorganic materials upon wafering using an abrasive tool |
|
| Vol 38, No 1 (2017) |
Article |
A technique for calculating tribotechnical characteristics of tractive cylindrical gear of VL-10 locomotive |
|
| Vol 38, No 1 (2017) |
Article |
Study of the geometric characteristics of friction surfaces of diamonds during polishing |
|
| Vol 38, No 1 (2017) |
Article |
The influence of friction and wear on the generation of surface microprofile of steel–sintered friction powder based on copper in the course of operation in lubricated medium |
|
| Vol 38, No 1 (2017) |
Article |
Wear of metals in lubricated joints operating in start–stop mode |
|
| Vol 38, No 1 (2017) |
Article |
Transformation of 20Х13 steel structure during intensive friction interactions |
|
| Vol 38, No 1 (2017) |
Article |
On the wear rate of an Sn11Sb5.5Cu Babbitt |
|
| Vol 38, No 1 (2017) |
Article |
Effect of bulk heat treatment and plasma surface hardening on the microstructure and erosion wear resistance of complex-alloyed cast irons with spheroidal vanadium carbides |
|
| Vol 38, No 1 (2017) |
Article |
Wear resistance of amorphous-crystalline detonation coatings with solid lubricant additive in vacuum |
|
| Vol 38, No 1 (2017) |
Article |
Express evaluation method of internal friction parameters in molding material briquettes |
|
| Vol 38, No 1 (2017) |
Article |
Friction machine for accelerated wear tests of frictional rolling elements |
|
| Vol 38, No 1 (2017) |
Article |
Tribological behaviour of the self-lubricating polymers against steel 45 using different velocity |
|
| Vol 38, No 2 (2017) |
Article |
Relationship between the tribological properties of experimental aluminum alloys and their chemical composition |
|
| Vol 38, No 2 (2017) |
Article |
Wear mechanism and chemical composition optimization of complex-alloyed cast iron with spheroidal vanadium carbide under conditions of abrasive erosion |
|
| Vol 38, No 2 (2017) |
Article |
Tribotechnical properties of sintered bronze strengthened by aluminide of Ti–46Al–8Cr |
|
| Vol 38, No 2 (2017) |
Article |
Peculiar properties of BK-8 hard alloy wear after volumetric laser pulsed hardening under production conditions |
|
| Vol 38, No 2 (2017) |
Article |
Examination of the coating of a cutting tool based on measurements microhardness and scratch tests |
|
| Vol 38, No 2 (2017) |
Article |
Tribological characteristics of calcium sulfonates as detergents for engine oils |
|
| Vol 38, No 2 (2017) |
Article |
Studying tribotechnical properties of nanostructured lubricating oils with various dispersive media |
|
| Vol 38, No 2 (2017) |
Article |
A technique for forecasting the durability of rolling bearings and the optimum choice of lubricants under flood-lubrication and oil-starvation conditions |
|
| Vol 38, No 2 (2017) |
Article |
Effective activation energies of chemical reactions and viscous flow of liquids depending on pressure in tribosystems with boundary and mixed friction |
|
| Vol 38, No 2 (2017) |
Article |
Closed-form solution of axisymmetric contact problem for a viscoelastic base within cycle of increasing and decreasing of load on the indenter |
|
| Vol 38, No 2 (2017) |
Article |
Calculation of the geometric position and the sizes of the static friction and sliding friction zones at the point of contact between an elastic wheel and a firm surface |
|
| Vol 38, No 2 (2017) |
Article |
Thermostressed state of a pad–disk tribosystem during single braking |
|
| Vol 38, No 2 (2017) |
Article |
Development of a new composite material for bits of supporting and centering devices |
|
| Vol 38, No 2 (2017) |
Article |
Modeling elastomer wear under the effects of solid particles at an angle to the surface |
|
| Vol 38, No 2 (2017) |
Article |
Energy analysis of wear of sliding friction units |
|
| Vol 38, No 3 (2017) |
Article |
Implementation of asymptotics of the wear contact problem solution for identifying the wear law based on the results of tribological tests |
|
| Vol 38, No 3 (2017) |
Article |
Consideration of contact wear regularities of the surface layers of stamping tools in order to increase resistance |
|
| Vol 38, No 3 (2017) |
Article |
Vibroplatform modeling with allowance for tribological aspects |
|
| Vol 38, No 3 (2017) |
Article |
Minimizing the number of experimental tribological tests on the friction machine of reciprocating motion |
|
| Vol 38, No 3 (2017) |
Article |
Multiple-support shafts with journal bearings: A simulation and evaluation of their performance |
|
| Vol 38, No 3 (2017) |
Article |
Structural and frictional peculiarities of nanocrystalline thermally expanded graphite particles sonicated in water and glycerol |
|
| Vol 38, No 3 (2017) |
Article |
An apparatus that analyzes the hydroabrasive wear of fiberglass pipes |
|
| Vol 38, No 3 (2017) |
Article |
Quantification of wt % F stabilizing water in soap-thickened plastic lubricants by the method of IR Fourier transform spectroscopy |
|
| Vol 38, No 3 (2017) |
Article |
Investigation of friction in dual leaf spring |
|
| Vol 38, No 3 (2017) |
Article |
Effect of preliminary ball burnishing on wear resistance of the nitrided VT22 alloy |
|
| Vol 38, No 3 (2017) |
Article |
Test procedure of cladded alloys for resistance against high temperature abrasive wear |
|
| Vol 38, No 3 (2017) |
Article |
Abrasive and fretting wear resistance of aluminum alloy specimens manufactured by laser microcladding |
|
| Vol 38, No 3 (2017) |
Article |
Effect of axial play on the sealing ability of the radial single-lip seal in an abrasive environment |
|
| Vol 38, No 3 (2017) |
Article |
Consideration of the multizone hydrodynamic friction, the misalignment of axes, and the contact compliance of a shaft and a bush of sliding bearings |
|
| Vol 38, No 3 (2017) |
Article |
Effect of crystal structure on the tribological properties of diamond coatings on hard-alloy cutting tools |
|
| Vol 38, No 4 (2017) |
Article |
Friction of ultrathin Si, F-containing coatings |
|
| Vol 38, No 4 (2017) |
Article |
Wear resistance of coating materials under the frictional heating conditions |
|
| Vol 38, No 4 (2017) |
Article |
Role of the strengthening phases in abrasive wear resistance of laser-clad NiCrBSi coatings |
|
| Vol 38, No 4 (2017) |
Article |
Tribotechnical characteristics of cast iron with a steel coating in lubrication medium under unsteady modes |
|
| Vol 38, No 4 (2017) |
Article |
Investigation of the influence of high hydrostatic pressure on the abrasive wear of hard-alloy materials |
|
| Vol 38, No 4 (2017) |
Article |
Effect of temperature on wear behavior of high-entropy alloys |
|
| Vol 38, No 4 (2017) |
Article |
Tribodiagnostics of aviation reduction gears according to the stages of the surface fatigue wear for its units |
|
| Vol 38, No 4 (2017) |
Article |
Impact of plasma hardening on the wear resistance of 38XC steel |
|
| Vol 38, No 4 (2017) |
Article |
Investigations of hydrocarbon-free oil components as challenging fillers to lubricating materials |
|
| Vol 38, No 4 (2017) |
Article |
Ultrasonic machining of engine lubricating oil during tribotechnical testing |
|
| Vol 38, No 4 (2017) |
Article |
Relative statistic fluctuation of sliding friction force |
|
| Vol 38, No 4 (2017) |
Article |
Thermal diagnostics of friction in the system of sliding bearings at low rotation speeds of a common shaft |
|
| Vol 38, No 4 (2017) |
Article |
Calculation of contact approach in single microasperity upon reindentation |
|
| Vol 38, No 4 (2017) |
Article |
Study of frictional contact during grinding and development of phenomenological model |
|
| Vol 38, No 5 (2017) |
Article |
Influence of antifriction fillers on the surface properties of elastomers based on propylenoxide rubbers |
|
| Vol 38, No 5 (2017) |
Article |
Improving the lubricating properties of 10W40 oil using oxidized graphite additives |
|
| Vol 38, No 5 (2017) |
Article |
Modification of graphite greases graphene nanostructures |
|
| Vol 38, No 5 (2017) |
Article |
The effect of carbon nanoadditives on the tribological properties of industrial oils |
|
| Vol 38, No 5 (2017) |
Article |
On the kinetics of forming an oxide film for lubrication when cutting steel in a controlled atmosphere |
|
| Vol 38, No 5 (2017) |
Article |
On the experimental techniques for assessing the specific friction force and its parameters |
|
| Vol 38, No 5 (2017) |
Article |
Research of the mechanism and development of the wear model of a diamond tool when turning aluminum-matrix composite materials |
|
| Vol 38, No 5 (2017) |
Article |
Optimal design of a frictional pair of a hub–plunger |
|
| Vol 38, No 5 (2017) |
Article |
Polymer thermal loading in the polytetrafluoroethylene–steel friction pair |
|
| Vol 38, No 5 (2017) |
Article |
Wear resistance coatings of nickel alloys obtained by supersonic plasma torch |
|
| Vol 38, No 5 (2017) |
Article |
Plastic deformation of the surface layer’s microroughness by a sliding tool with strong contact friction |
|
| Vol 38, No 5 (2017) |
Article |
Analysis of changes in the mechanical properties of the surface layers of aluminum alloys under the conditions of sliding friction |
|
| Vol 38, No 5 (2017) |
Article |
Formation of adhesive bonds under contact rotaprint lubrication |
|
| Vol 38, No 6 (2017) |
Article |
New Approach for Prediction of Non-Conformal Contact Fatigue Life Considering Lubrication Performance Parameters |
|
| Vol 38, No 6 (2017) |
Article |
Fluid Flow Analysis for Friction Torque around Rolling Element in Ball Bearings |
|
| Vol 38, No 6 (2017) |
Article |
Multi-Objective Optimization of Spur Gearbox with Inclusion of Tribological Aspects |
|
| Vol 38, No 6 (2017) |
Article |
Application of Semi-Hertzian Approach to Predict the Dynamic Behavior of Railway Vehicles Through a Wear Evolution Model |
|
| Vol 38, No 6 (2017) |
Article |
High-Speed Contact Study between a Ti-6-Al-4V Tool and an Abradable Coating Using Ballistic Benches and a Dynamic Compensation Approach |
|
| Vol 38, No 6 (2017) |
Article |
The Effect of WS2 Powder Added Lubricant on Friction and Wear of Tetrahedral Amorphous Carbon Coating Films |
|
| Vol 38, No 6 (2017) |
Article |
Tribological Properties of a C/C–SiC–Cu Composite Brake Disc |
|
| Vol 38, No 6 (2017) |
Article |
Tribological Performance of Laser-Textured Polyoxymethylene under Boundary Lubricated Sliding Condition |
|
| Vol 38, No 6 (2017) |
Article |
Scratch Behavior of ZrO2 Thin Film Prepared by Atomic Layer Deposition Method on Silicon Wafer |
|
| Vol 38, No 6 (2017) |
Article |
Analysis of Physical Friction Characteristics about Handwrite Feeling—Rough and Smooth |
|
| Vol 38, No 6 (2017) |
Article |
Electrochemical Analysis of the Slurry Composition for Chemical Mechanical Polishing of Flexible Stainless-Steel Substrates |
|
| Vol 38, No 6 (2017) |
Article |
Efficiency Analysis of a Cycloid Reducer Considering Tolerance |
|
| Vol 39, No 1 (2018) |
Article |
Effect of Copper Content on Tribological Characteristics of Fe−C−Cu Composites |
|
| Vol 39, No 1 (2018) |
Article |
Study of the Performance of Copper Coatings Formed by Electroplating and Deformation Cladding with a Flexible Tool |
|
| Vol 39, No 1 (2018) |
Article |
Study of the Tribotechnical Properties of a Cutting Tool Made of Sintered Powder Tool Materials |
|
| Vol 39, No 1 (2018) |
Article |
Calculating Life Spans of Bearings Taking into Consideration the Wear and Failure of PTFE Cages |
|
| Vol 39, No 1 (2018) |
Article |
Contact Stiffness of Machine Components and the Influence of the Microgeometry of the Contact Surfaces on It |
|
| Vol 39, No 1 (2018) |
Article |
Contact Problem for a Viscoelastic Half-Space and a Rough Rigid Cylinder under the Conditions of Hydrodynamic Lubrication |
|
| Vol 39, No 1 (2018) |
Article |
Wear Resistance of Amorphous-Crystalline Coatings with Lubricants |
|
| Vol 39, No 1 (2018) |
Article |
Impact of Tribological Properties of Fibrous Materials on Mechanical Processing |
|
| Vol 39, No 1 (2018) |
Article |
Calculated Model of Wedge-Shaped Sliding Support Operating on Lubricating Material |
|
| Vol 39, No 1 (2018) |
Article |
Contact Problems for Rolling with Slip for Viscoelastic Solids |
|
| Vol 39, No 1 (2018) |
Article |
Movement of a Solid Body across a Horizontal Plane with a Circular Area of the Bearing and Uniform Load Distribution under Asymmetric Orthotropic Friction |
|
| Vol 39, No 1 (2018) |
Article |
Modeling Solutions of Axisymmetric Contact Problems Using Dimensionality Reduction Method with or without Adhesion |
|
| Vol 39, No 1 (2018) |
Article |
Modeling of Microstructures and Analysis of Abrasive Wear of Arc-Welded Hadfield Steel |
|
| Vol 39, No 2 (2018) |
Article |
Effect of Rheological Properties of a Magnetosensitive Tool on the Friction and Wear of Polished Surface |
|
| Vol 39, No 2 (2018) |
Article |
Influence of Parameters of Reactive Magnetron Sputtering on Tribomechanical Properties of Protective Nanostructured Ti–Al–N Coatings |
|
| Vol 39, No 2 (2018) |
Article |
The Effect of the Carbon-Fiber Reinforcement of Thermoplastic Fluoropolymers on Their Wear under Heavy Loads |
|
| Vol 39, No 2 (2018) |
Article |
Wear Resistance of Nickel–Cobalt–Polytetrafluoroethylene Composite Electrolytic Coatings Deposited from Chloride-Containing Electrolyte |
|
| Vol 39, No 2 (2018) |
Article |
Influence of the Addition of Vanadium Nitride on the Structure and Specifications of a Diamond–(Fe–Cu–Ni–Sn) Composite System |
|
| Vol 39, No 2 (2018) |
Article |
Effect of the Molecular Weight of Polyarylene Ether Ketones on the Tribological Properties |
|
| Vol 39, No 2 (2018) |
Article |
Regulation of the Tribological Characteristics of Polyester Fabrics by Surface Modification Using Tetrafluoroethylene Telomeres |
|
| Vol 39, No 2 (2018) |
Article |
Method of Constructing a 3D Friction Map for a Rubber Tire Tread Sliding Over a Rough Surface |
|
| Vol 39, No 2 (2018) |
Article |
Test Analysis of Friction Couples With Solid Lubricant Coatings under Ground–Space Conditions and Prediction of Tribological Characteristics |
|
| Vol 39, No 2 (2018) |
Article |
Study of Friction and Wear Characteristics of the Friction Pair of Centrifugal Brake Rollers |
|
| Vol 39, No 2 (2018) |
Article |
Molecular Dynamics of a Thin Liquid Argon Layer Squeezed between Diamond Surfaces with a Periodic Relief |
|
| Vol 39, No 2 (2018) |
Article |
Composition and Tribological Properties of Hardened Cutting Blades of Tillage Machines under Abrasive Deterioration |
|
| Vol 39, No 2 (2018) |
Article |
The Effect of Rheological Parameters on the Tribotechnical Characteristics of Modified I-40A Oil |
|
| Vol 39, No 2 (2018) |
Article |
Triboacoustic Control of Fretting |
|
| Vol 39, No 3 (2018) |
Article |
On the Effect the Iron Content on the Tribological Properties of Sintered Tin-iron Bronze |
|
| Vol 39, No 3 (2018) |
Article |
Investigation of the Structure of Surface and Tribological Properties of Composition Coatings Based on Thermosetting Epoxy–Polyester Resins |
|
| Vol 39, No 3 (2018) |
Article |
The Application of Fibers and Nanoparticles in the Form of Copper-Based Powder Sintered Friction Material with Lubricant Cooling |
|
| Vol 39, No 3 (2018) |
Article |
Friction and Wear of Fiber Composites with Abrasive Particles on Contact Surface |
|
| Vol 39, No 3 (2018) |
Article |
A Method for Determining the Convergence under Contact between a Sphere and a Flat Surface of a Workpiece under Small Loads |
|
| Vol 39, No 3 (2018) |
Article |
The Solution of the Spatial Hydrodynamic Problem in a Wedge-Shaped Clearance |
|
| Vol 39, No 3 (2018) |
Article |
Studies on the Tribological Properties and Structure of Antifrictional Iron-Containing Aluminum Alloys |
|
| Vol 39, No 3 (2018) |
Article |
Wear Peculiarities of the Grooves of a Hot-Rolling Mill for Electric Copper |
|
| Vol 39, No 3 (2018) |
Article |
Kinetics of the Change in the Surface Profile of Aluminum Bronzes during Cavitation Wear |
|
| Vol 39, No 3 (2018) |
Article |
Surface Modification of Machine Parts Made of Iron–Carbon Alloys Operating under Conditions of Friction and Wear |
|
| Vol 39, No 3 (2018) |
Article |
Investigation of the Adhesive Strength of Antifriction Coatings Depending on the Energy Parameters of Electro-Spark Alloying |
|
| Vol 39, No 3 (2018) |
Article |
Anomalous Dependence of Wear Properties on the Mixture Composition of Hydrocarbon Oils with Polyorganosiloxanes |
|
| Vol 39, No 3 (2018) |
Article |
Tribological Properties of Multilayer Coatings for Cutting Tool |
|
| Vol 39, No 3 (2018) |
Article |
The Mathematical Simulation and Study of the Electrical Resistance of the Friction Zone of the Hip Joint Endoprosthesis with a Metal–Metal Friction Pair |
|
| Vol 39, No 3 (2018) |
Article |
Rotor Sealings based on a Metal–Rubber Elastic Porous Material for Turbomachinery |
|
| Vol 39, No 4 (2018) |
Article |
Diagnostics of the Wear of Tribological Assemblies Using an Inductive Wear Debris Counter |
|
| Vol 39, No 4 (2018) |
Article |
Theoretical Fundamentals of the Wear Formation and the Wear Resistance Management in Printing |
|
| Vol 39, No 4 (2018) |
Article |
The Model of Friction and Wear of the Elastic Coating against a Wavy Punch under Vibrations |
|
| Vol 39, No 4 (2018) |
Article |
On the Temperature Effect on the Parameters of the Specific Friction Force of Metals |
|
| Vol 39, No 4 (2018) |
Article |
Effect of High-Density Electric Current on Wear and Average Temperature of Steel/Steel Triboelectric Contact |
|
| Vol 39, No 4 (2018) |
Article |
Modification of the Tribocouplings by Spraying Metal Coatings to Improve Their Fretting Resistance |
|
| Vol 39, No 4 (2018) |
Article |
Deformations Features of TiN Doped Coatings with Columnar Structure in Tribological Tests |
|
| Vol 39, No 4 (2018) |
Article |
Estimation of Wear Resistance of Plasma-Carburized Steel Surface in Conditions of Abrasive Wear |
|
| Vol 39, No 4 (2018) |
Article |
Interaction Mechanisms between Schungite and Friction Surfaces under High-Energy Ball Milling |
|
| Vol 39, No 4 (2018) |
Article |
Assessing Parameters of the Accelerator Disk of a Centrifugal Mill Taking into Account Features of Particle Motion on the Disk Surface |
|
| Vol 39, No 4 (2018) |
Article |
Improvement of Adhesion of the Wheels of the Railway Carriage to the Rails by Means of Supply of the Scale and Magnetite Particles to the Contact Zone |
|
| Vol 39, No 4 (2018) |
Article |
Lubricating Materials for Mechanisms Operating in Space |
|
| Vol 39, No 4 (2018) |
Article |
Study of Tribological Properties of Tallow Modified by Graphene and Expanded Graphite |
|
| Vol 39, No 4 (2018) |
Article |
Properties of Coatings Based on Carbon and Nitrogen-Doped Carbon Obtained Using a Pulsed Vacuum Arc Method |
|
| Vol 39, No 4 (2018) |
Article |
Impact of Metastable Austenite on the Wear Resistance of Tool Steel |
|
| Vol 39, No 5 (2018) |
Article |
The Effect of PTFE Powder Adhesive Activation on the Wear Resistance of Block PTFE |
|
| Vol 39, No 5 (2018) |
Article |
Wear Resistance of Glass- and Carbon-Filled Polyamide Composites for Metal-Polymer Gears |
|
| Vol 39, No 5 (2018) |
Article |
Tribological and Physicomechanical Properties of Oil-Filled, Phenilon-Based Composites |
|
| Vol 39, No 5 (2018) |
Article |
The Effect of Orienting Carbon Coatings Alloyed with Carbide-Forming Elements on the Antifriction Properties of Lubricants |
|
| Vol 39, No 5 (2018) |
Article |
Effect of Mesomorphism on Lubricating Efficiency of Nanomaterials under Boundary Friction |
|
| Vol 39, No 5 (2018) |
Article |
Wear Resistance of Fe33Ni8Cr8W8Mo8Co8C16B11 Metallic Glass-Based Electrospark Coatings |
|
| Vol 39, No 5 (2018) |
Article |
Effect of Ozone Oxidation and Modification with a Carbon Framework on the Tribotechnical Characteristics of a Plastic Lubricant |
|
| Vol 39, No 5 (2018) |
Article |
Influence of Tin on the Tribotechnical Properties of Complex Antifriction Aluminum Alloys |
|
| Vol 39, No 5 (2018) |
Article |
A Method for Calculating the Frictional Moment in Cageless Bearings |
|
| Vol 39, No 5 (2018) |
Article |
Minimization of the Thermal State of the Hub of a Frictional Pair Using the Criterion of Uniform Temperature Distribution on a Friction Surface |
|
| Vol 39, No 5 (2018) |
Article |
Simulation of Regular Relief Sliding over an Elastomer |
|
| Vol 39, No 5 (2018) |
Article |
An Abrasive Wear Forecasting Method in the Design of Soil-Cutting Tools |
|
| Vol 39, No 5 (2018) |
Article |
Wear-Resistance, Hardness, and Microstructure of Deposits with a High Chrome Content |
|
| Vol 39, No 5 (2018) |
Article |
Investigation of the Influence of Complex Fillers on the Properties and Structure of Polytetrafluoroethylene |
|
| Vol 39, No 5 (2018) |
Article |
Carbonic Acid Diester-Based Magnetic Nanodispersed Lubricant Oils |
|
| Vol 39, No 6 (2018) |
Article |
Study of the Influence of the Iron Oxide(III) on the Tribotechnical and Vibroacoustic Characteristics of the Frictional Composites for the Stationary Friction Units |
|
| Vol 39, No 6 (2018) |
Article |
Combined Model of Abrasive Wear of Rotor-Accelerator Blades in a Centrifugal Mill |
|
| Vol 39, No 6 (2018) |
Article |
Some Specific Features in the Formation of Pressure in Sliding Bearing Clearance |
|
| Vol 39, No 6 (2018) |
Article |
Sintered Copper-Based Powder Friction Material Filled with Fullerene-Like Glass Carbon |
|
| Vol 39, No 6 (2018) |
Article |
Tribochemical Processes in a Phenol Formaldehyde Polymer Modified by Polyformaldehyde Copolymer |
|
| Vol 39, No 6 (2018) |
Article |
The Influence of Metal Cations of Mechanoactivated Bentonite on Tribochemical Processes in PTFE |
|
| Vol 39, No 6 (2018) |
Article |
Nonlinear Numerical Model of Friction Heating during Rotary Friction Welding |
|
| Vol 39, No 6 (2018) |
Article |
Tribological Properties of Dodecaborides of Rare-Earth Metals |
|
| Vol 39, No 6 (2018) |
Article |
Percolation Model of Friction Wear for Carbon Plastics Based on Ultrahigh-Molecular-Weight Polyethylene |
|
| Vol 39, No 6 (2018) |
Article |
Cavitation and Erosion Resistance of Polymeric Materials |
|
| Vol 39, No 6 (2018) |
Article |
Study of Tribological Characteristics of Compatible Materials in Tribosystems of Extruders for Manufacturing Solid Fuel from Biomass |
|
| Vol 39, No 6 (2018) |
Article |
Durability Evaluation for Friction Pairs with Solid Lubrication Coatings under Reverse Motion |
|
| Vol 39, No 6 (2018) |
Article |
Dispersion Media Based on Aqueous Binary Compositions Modified by PEG-Stearox-6 for Abrasive Metalworking |
|
| Vol 39, No 6 (2018) |
Article |
Viscoelastic Contact of Textured Surfaces |
|
| Vol 39, No 6 (2018) |
Article |
Tribolical Study of Cermet Coatings Al–Sn–Zn–Al2O3 for Friction Couples |
|
| Vol 39, No 6 (2018) |
Article |
Improving the Working Capacity Resource for a Roller Cone–Drill Rod Joint of a Drill Bit |
|
| Vol 39, No 6 (2018) |
Article |
Corrosive Action and Oxidation of Vegetable Oils Used in Lubricants |
|
| Vol 39, No 6 (2018) |
Article |
Low-Modulus Carbon Fibers for Antifriction Сarbon Plastics |
|
| Vol 39, No 6 (2018) |
Article |
Wear Mechanism of Elastomers under the Direct Impact of Solid Particles in an Aqueous Medium |
|
| Vol 40, No 1 (2019) |
Article |
Contact Wear of X165GrMoV12 and X160GrMoV12-1 Moderate Heat Resistant Die Steels with a Surface Modified Layer |
|
| Vol 40, No 1 (2019) |
Article |
The Screening Effect of Ethanol Amines and Cholesteric Liquid Crystal Nanomaterials upon Friction Interaction with Metals in Plastic Lubricants |
|
| Vol 40, No 1 (2019) |
Article |
Influence of the Type of Carbon Fiber Filler on the Physical–Mechanical and Tribological Properties of PTFE Composites |
|
| Vol 40, No 1 (2019) |
Article |
Cardo Copolymers: A Friction–Chemical Structure Relationship |
|
| Vol 40, No 1 (2019) |
Article |
The Influence of Brominated UHMWPE on the Tribological Characteristics and Wear of Polymeric Nanocomposites Based on UHMWPE and Nanoparticles |
|
| Vol 40, No 1 (2019) |
Article |
Modeling the Accumulation of Contact Fatigue Damage in Materials with Residual Stresses under Rolling Friction |
|
| Vol 40, No 1 (2019) |
Article |
Transition between Modes of Adhesion and Sliding Friction in Contacts of Axially Symmetric Bodies |
|
| Vol 40, No 1 (2019) |
Article |
Procedure to Determine Friction Torque in a Mechanical Membrane Contact Seal |
|
| Vol 40, No 1 (2019) |
Article |
Modeling of External Dynamics of Frictional Interaction Using the Elastic System Stability Theory |
|
| Vol 40, No 1 (2019) |
Article |
Study of the Thermal Resistance of Rough-Surfaced Junctions by Computer-Based Simulation |
|
| Vol 40, No 1 (2019) |
Article |
Plastic Deformation of a Rough Surface by the Rigid Rolling Cylinder |
|
| Vol 40, No 1 (2019) |
Article |
Influence of Roughness of Working Surfaces of the Wheel–Rail System of Open-Pit Locomotives with an Implementable Adhesion Coefficient |
|
| Vol 40, No 1 (2019) |
Article |
Evaluation of the Tribotechnical Characteristics of Therma-Barrier Sealing Coatings under Critical Loads |
|
| Vol 40, No 1 (2019) |
Article |
Calculation of a Radial Slider Bearing with a Fusible Coating |
|
| Vol 40, No 1 (2019) |
Article |
Creating and Applying Antifriction Bearing Wood–Metal Materials |
|
| Vol 40, No 1 (2019) |
Article |
Improving Abrasive Wear Resistance for Steel Hardox 400 by Electro-Spark Deposition |
|
| Vol 40, No 2 (2019) |
Article |
Structure, as well as the Tribological and Mechanical Properties, of Extrudable Polymer-Polymeriс UHMWPE Composites for 3D Printing |
|
| Vol 40, No 2 (2019) |
Article |
Improving the Wear Resistance of Carbon Fiber Reinforced Polyvinylidene Fluoride by the Method of Radiation Modification |
|
| Vol 40, No 2 (2019) |
Article |
Investigation of Influence of Methods of Mixing Components on the Properties of Composites Based on PTFE and Carbon Fibers |
|
| Vol 40, No 2 (2019) |
Article |
Investigation of the Correlation between the Natural Extension Ratio and Abrasive Wear Resistance in Polyethylene |
|
| Vol 40, No 2 (2019) |
Article |
Evaluation Method of Impact and Abrasive Steel Resistance |
|
| Vol 40, No 2 (2019) |
Article |
Wear of a Flexible Abrasive Tool |
|
| Vol 40, No 2 (2019) |
Article |
Oscillatory Processes under Friction in Materials and Coatings Based on Aluminum |
|
| Vol 40, No 2 (2019) |
Article |
Analysis of Frictional Resistance Arising at the Edge of the Sheet Metal Drawing Die |
|
| Vol 40, No 2 (2019) |
Article |
Tribological and Rheological Properties of Thermally Treated Steel under Reverse Friction |
|
| Vol 40, No 2 (2019) |
Article |
Comparison of Mechanical and Tribological Properties of Nitride and Oxynitride Coatings Based on Chrome and Zirconium Obtained by Cathodic Arc Evaporation |
|
| Vol 40, No 2 (2019) |
Article |
Investigation of the Fracture and Strength of a Compound with a Carbide Base of a Wear-Resistant Ion-Plasma Vacuum-Arc Ti–N, Ti–Al–N, Ti–Al–Cr–N, and Ti–Al–Ni–N Coatings by the Scratch Testing |
|
| Vol 40, No 2 (2019) |
Article |
Wear of Dies of Bulk Straining According to Criteria of Low-Cycle Fatigue and Plastic Crushing |
|
| Vol 40, No 2 (2019) |
Article |
Friction Features of a Rubber Surface Modified by a Carbon Coating |
|
| Vol 40, No 2 (2019) |
Article |
Tribological Features of Environmentally Safe Lubricant Compositions Based on Rapeseed Oil |
|
| Vol 40, No 3 (2019) |
Article |
Studying Nanotribological Properties of Functional Materials via Atomic Force Microscopy |
|
| Vol 40, No 3 (2019) |
Article |
Evaluating the Applicability of Electrodeformation Placing Technology by a Flexible Tool for Chromeing Hydrocilindes |
|
| Vol 40, No 3 (2019) |
Article |
Surface Parameters with Different Treatment Technologies and Their Effect on Wear |
|
| Vol 40, No 3 (2019) |
Article |
Selection of Materials of Friction Lining Centrifugal Brake Rollers |
|
| Vol 40, No 3 (2019) |
Article |
Modeling the Hydrodynamic Friction Mode on Amsler Type Friction Testing Machines |
|
| Vol 40, No 3 (2019) |
Article |
Powder Bearings with Polymer Inserts |
|
| Vol 40, No 3 (2019) |
Article |
Phase Composition, Mechanical and Tribological Properties of Ti–Al–N System Coatings Deposited by Vacuum-Arc Method |
|
| Vol 40, No 3 (2019) |
Article |
Improving Wear Resistance of Fast-Cutting Steel R6M5 after a Volume Pulse Laser Strength |
|
| Vol 40, No 3 (2019) |
Article |
Calculating the Friction Force at Rest in Joints of Similar Hardness Assembled with Tightness |
|
| Vol 40, No 3 (2019) |
Article |
Markovian Chain Theory Application for the Description of Wearproof Powder Coating Profile under Sliding Friction |
|
| Vol 40, No 3 (2019) |
Article |
Modeling of Stationary Frictional Heating of a Coated Body |
|
| Vol 40, No 3 (2019) |
Article |
Research on the Effect of Lanolin on Rheological and Tribotechnical Characteristics of Complex Calcium Grease |
|
| Vol 40, No 3 (2019) |
Article |
Applying Anisotropy to Lubricant Oil Fluorescence to Evaluate Its Physical and Chemical Properties |
|
| Vol 40, No 4 (2019) |
Article |
Study of the Conditions for the Formation of an Adsorption Lubrication Mode of Heavily Loaded Friction Couples with Modeling in a Laboratory Setup |
|
| Vol 40, No 4 (2019) |
Article |
Environmentally Safe Transmission Oil for a Helicopter Tail Gearbox |
|
| Vol 40, No 4 (2019) |
Article |
Study of the Influence of the Parameters of Ultrasonic Treatment of Motor Oil on the Wear of Friction Pairs during the Burn-In Period |
|
| Vol 40, No 4 (2019) |
Article |
Friction Unit of a Disc Brake Based on a Combination of Friction Materials |
|
| Vol 40, No 4 (2019) |
Article |
Friction, Wear, and Monitoring of Heavily Loaded Tribosystems: An Innovative Approach to Studying the Processes |
|
| Vol 40, No 4 (2019) |
Article |
Wear of Composition Coatings Containing SiC–Al2O3 for Piston Skirt of Internal Combustion Engines of Aircraft Ground Support Equipment |
|
| Vol 40, No 4 (2019) |
Article |
Antifriction Nanofiller Composites for Food Processing and Medical Equipment |
|
| Vol 40, No 4 (2019) |
Article |
Estimation of the Effect of Temperature and Microgeometry of the Counterbody Surface on Wear Resistance of Tread Rubber |
|
| Vol 40, No 4 (2019) |
Article |
Improving the Tribological Properties of Polyethylene Products by Modification with Metal Chelate Complexes |
|
| Vol 40, No 4 (2019) |
Article |
Modeling of Indentation of Hard Coatings by an Arbitrarily Shaped Indenter |
|
| Vol 40, No 4 (2019) |
Article |
A Parametric Failure Model for the Calculation of the Fit Tolerance of Joints with Clearance |
|
| Vol 40, No 4 (2019) |
Article |
Physical and Chemical Explanation of the Choice of a Counterbody Material for Friction Pairs with Polymer Materials |
|
| Vol 40, No 4 (2019) |
Article |
Prediction Method of Contact Pressures, Wear and Life of Worm Gears with Archimedean and Involute Worm, Taking Tooth Correction into Account |
|
| Vol 40, No 4 (2019) |
Article |
Tribotechnical Characteristics of Commercially Pure Titanium with Different Grain Sizes and TiC and TiO2 Coatings |
|
| Vol 40, No 5 (2019) |
Article |
Sclerometric Investigation of the Process Pressure Effect on the Properties of Polyethylene Nanocomposite Surfaces |
|
| Vol 40, No 5 (2019) |
Article |
Improving the Antifriction Properties of Ceramic Coatings Obtained by the Method of MAO on Aluminum Alloys |
|
| Vol 40, No 5 (2019) |
Article |
Frictional Characteristics of Metal Friction Pairs and the Amontons and Coulomb Friction Laws |
|
| Vol 40, No 5 (2019) |
Article |
The Influence of Low Melting Elements (Pb, Bi, Cd, In) on Tribological Properties of Al–Si–Cu Alloys |
|
| Vol 40, No 5 (2019) |
Article |
Running-in Procedures and Performance Tests for Tribosystems |
|
| Vol 40, No 5 (2019) |
Article |
Theoretical Estimation of The Influence of Plastic Deformation on Average Coefficient of Friction in the Process of Nanostructuring Burnishing of Metal Samples |
|
| Vol 40, No 5 (2019) |
Article |
Abrasive Wear Resistance of High-Speed Steel R6M5 after Laser Melting and Tempering |
|
| Vol 40, No 5 (2019) |
Article |
Influence of Wear Particles and Reverse Transfer of the Material on Wear Intensity of Aluminum Alloy under Dry Friction on Steel |
|
| Vol 40, No 5 (2019) |
Article |
Interrelation between Tribological and Microstructural Parameters of a Tribomaterial under Cyclic Rolling |
|
| Vol 40, No 5 (2019) |
Article |
Abrasive Wear of an Anchoring Material Based on Modified Birchwood |
|
| Vol 40, No 5 (2019) |
Article |
Benchmark Trials of Axial-Piston Pumps at Different Levels of Oil-with-Water Fouling |
|
| Vol 40, No 5 (2019) |
Article |
Experimental Study of Antifriction Properties of Fluids with Nanoparticles |
|
| Vol 40, No 5 (2019) |
Article |
A Method of Calculating the Friction Moment in Cageless Bearings |
|
| Vol 40, No 5 (2019) |
Article |
Computational Procedure of a Gearing Module of Spur Gear Transmissions on Wear Resistance of Gearwheel Teeth |
|
| Vol 40, No 5 (2019) |
Article |
Computational Procedure of Wear Resistance of Gear Transmission Teeth under Skew of the Axes of Conjugated Wheels |
|
| Vol 40, No 5 (2019) |
Article |
Effect of Phosphomolybdates on the Tribological Characteristics of Lubricants |
|
| Vol 40, No 5 (2019) |
Article |
Influence of Current Waveform on the Wear Resistance of Coatings Obtained on VT6 Titanium Alloy with the Electrolytic Plasma Treatment Method |
|
| Vol 40, No 5 (2019) |
Article |
Tribological Properties of Plastic Lubricants in Compositions with Various Carbon Nanostructures |
|
| Vol 40, No 5 (2019) |
Article |
The Effect of Ultrasonic Treatment of a Lubricating Oil on the Operation of a Tribological Assembly and the Assessment of the Residual Effects in the Oil |
|
| Vol 40, No 5 (2019) |
Article |
Cavitation-Erosion Wear Resistance of Fluoroplasticics in Model Food Production Media |
|
| Vol 40, No 5 (2019) |
Article |
Structural Model of Frictional Processes for Polymer/Carbon Nanotube Nanocomposites |
|
| Vol 40, No 6 (2019) |
Article |
The Influence of the Roughness of a Steel Counterbody on the Tribological Characteristics of Friction Composites under Friction in Oil |
|
| Vol 40, No 6 (2019) |
Article |
Simulation of Microcontact Interactions during Gas-Abrasive Wearing of Steels with Allowance for Strain Hardening |
|
| Vol 40, No 6 (2019) |
Article |
Influence of Copper Frictional Material Composition on Structure and Tribotechnical Properties |
|
| Vol 40, No 6 (2019) |
Article |
Computer-Aided Design of the Composition of Extrudable Polymer–Polymer UHMWPE Composites with Specified Antifriction and Mechanical Properties |
|
| Vol 40, No 6 (2019) |
Article |
Abrasive Wear of a Steel Counterbody in Frictional Contact with Pressed Modified Wood |
|
| Vol 40, No 6 (2019) |
Article |
The Antifriction Properties of Amorphous Poly(Arylene Ether Ketone) Copolymers with a Low Content of Cardo Groups |
|
| Vol 40, No 6 (2019) |
Article |
Prospects for the Application of Compound Dampers in Turbomachinery Rotors |
|
| Vol 40, No 6 (2019) |
Article |
Mechanical and Tribological Properties of Polyethylene Terephthalate Track-Etched Membranes after Steam and Radiation Sterilization |
|
| Vol 40, No 6 (2019) |
Article |
Kinetics of Antifriction Film Formation in Sunflower Oil |
|
| Vol 40, No 6 (2019) |
Article |
Antifriction Properties of Diamond-Like Coating and Titanium Aluminum Nitride in Model Lubricant Media |
|
| Vol 40, No 6 (2019) |
Article |
The Kinetics of Load-Bearing Capacity Formation of Sliding Pairings in the Use of Nanomodified Lubricants |
|
| Vol 40, No 6 (2019) |
Article |
Rheology of Plastic Lubricants with Additives of Carbon Nanostructures of Various Type |
|
| Vol 40, No 6 (2019) |
Article |
Use of an Ionic Liquid as an Additive for Environmentally Friendly Lubricants |
|
| Vol 40, No 6 (2019) |
Article |
The Optimal Design of a Friction Unit with Uniform Contact Pressure |
|
| Vol 40, No 6 (2019) |
Article |
Calculating the Contact Approach in a Cylinder upon Reindentation |
|
| Vol 40, No 6 (2019) |
Article |
Calculation of the Friction Coefficient between a Steady Elastic Wheel and a Solid Support Surface in the Presence of a Lateral Force |
|
| Vol 40, No 6 (2019) |
Article |
Mathematical Modeling of the Resistance Force of the Profile of a Flat-Back Knife |
|
| Vol 40, No 6 (2019) |
Article |
The Tribological Properties of Superhard and Functional Coatings Based on Carbide and Boron Nitride |
|
| Vol 40, No 6 (2019) |
Article |
Antifriction Nanocomposite Coatings that Contain Magnesium Carbide |
|
| Vol 40, No 6 (2019) |
Article |
Mechanism Wear of Elastomers with Oblique Impact of Solid Particles in the Aqueous Medium |
|
| Vol 40, No 6 (2019) |
Article |
Interrelation of Surface Temperature and Tribological Characteristics of a Protective Coating on a Tool |
|
