Отправить статью по E-mail Investigation of the mold powder film structure and its influence on the developed surface in continuous casting
- Авторы: Anisimov K.N.1,2, Longinov A.M.1,2, Toptygin A.M.1,2, Gusev M.P.3, Zarubin S.V.3
-
Учреждения:
- Bardin Central Research Institute of Ferrous Metallurgy
- OOO Korad
- Bauman Moscow State Technical University
- Выпуск: Том 46, № 7 (2016)
- Страницы: 489-495
- Раздел: Article
- URL: https://ogarev-online.ru/0967-0912/article/view/178847
- DOI: https://doi.org/10.3103/S0967091216070032
- ID: 178847
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
In the continuous casting of steel, samples of the of the mold flux films are taken from the mold. The mineralogical composition of the crystalline, intercrystalline, and amorphous phases is determined. The influence of the morphology of the cuspidine crystals on the surface macrogeometry of the film is established. The frictional coefficient between a copper counterbody and the mold flux film surface is determined. The wear of the counterbody is greater on interaction with the crystalline surface.
Об авторах
K. Anisimov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Автор, ответственный за переписку.
Email: akn@corad.ru
Россия, Moscow; Moscow
A. Longinov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: akn@corad.ru
Россия, Moscow; Moscow
A. Toptygin
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: akn@corad.ru
Россия, Moscow; Moscow
M. Gusev
Bauman Moscow State Technical University
Email: akn@corad.ru
Россия, Moscow
S. Zarubin
Bauman Moscow State Technical University
Email: akn@corad.ru
Россия, Moscow
Дополнительные файлы
