Production of high-manganese steel in arc furnaces. Part 2
- Авторы: Vdovin K.N.1, Feoktistov N.A.1, Sinitskii E.V.1, Gorlenko D.A.1, Durov N.A.2
-
Учреждения:
- Nosov Magnitogorsk State Technical University
- Moscow Institute of Steel and Alloys
- Выпуск: Том 46, № 1 (2016)
- Страницы: 16-20
- Раздел: Article
- URL: https://ogarev-online.ru/0967-0912/article/view/178507
- DOI: https://doi.org/10.3103/S0967091216010150
- ID: 178507
Цитировать
Аннотация
Metallographic data are presented for manganese steel before and after ladle treatment—specifically, treatment with calcium–strontium carbonate or argon injection in the ladle or both. Quantitative analysis of the nonmetallic inclusions is undertaken. The position of the inclusions relative to the grain boundaries is determined. Electron microscopy permits detailed study of the composition and form of the inclusions that appear during ladle treatment and without such treatment. The influence of various types of ladle treatment on the impact strength of manganese steel is discussed. Alloying of the manganese steel with vanadium is considered. Practical data regarding the influence of alloying with vanadium on the impact strength of the manganese steel are presented.
Об авторах
K. Vdovin
Nosov Magnitogorsk State Technical University
Автор, ответственный за переписку.
Email: kn.vdovin@gmail.com
Россия, Magnitogorsk
N. Feoktistov
Nosov Magnitogorsk State Technical University
Email: kn.vdovin@gmail.com
Россия, Magnitogorsk
E. Sinitskii
Nosov Magnitogorsk State Technical University
Email: kn.vdovin@gmail.com
Россия, Magnitogorsk
D. Gorlenko
Nosov Magnitogorsk State Technical University
Email: kn.vdovin@gmail.com
Россия, Magnitogorsk
N. Durov
Moscow Institute of Steel and Alloys
Email: kn.vdovin@gmail.com
Россия, Moscow
Дополнительные файлы
