Enviar artigo por via de e-mail Solidification of a thick slab in a mold with supplementary cooling
- Autores: Kuklev A.V.1, Zarubin S.V.2, Gusev M.P.2,3, Longinov A.M.2,3, Tinyakov V.V.1,3
-
Afiliações:
- Bardin Central Research Institute of Ferrous Metallurgy
- Skolkovo Institute of Science and Technology
- OOO Korad
- Edição: Volume 47, Nº 8 (2017)
- Páginas: 550-553
- Seção: Article
- URL: https://ogarev-online.ru/0967-0912/article/view/179754
- DOI: https://doi.org/10.3103/S096709121708006X
- ID: 179754
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A model is proposed for the solidification of thick ingots with supplementary cooling by means of mandrels. On that basis, the overheating of the liquid steel in the classical system may be eliminated. The effectiveness of supplementary cooling by means of mandrels is shown in a computational experiment. The solidification rate may be significantly modified by that means.
Palavras-chave
Sobre autores
A. Kuklev
Bardin Central Research Institute of Ferrous Metallurgy
Autor responsável pela correspondência
Email: gusev-m.p@yandex.ru
Rússia, Moscow
S. Zarubin
Skolkovo Institute of Science and Technology
Email: gusev-m.p@yandex.ru
Rússia, Moscow
M. Gusev
Skolkovo Institute of Science and Technology; OOO Korad
Email: gusev-m.p@yandex.ru
Rússia, Moscow; Moscow
A. Longinov
Skolkovo Institute of Science and Technology; OOO Korad
Email: gusev-m.p@yandex.ru
Rússia, Moscow; Moscow
V. Tinyakov
Bardin Central Research Institute of Ferrous Metallurgy; OOO Korad
Email: gusev-m.p@yandex.ru
Rússia, Moscow; Moscow
Arquivos suplementares
