Email this article Regulating the Coil Stress by Adjusting the Rigidity of the Winding Drum
- Authors: Mazur V.L.1, Timoshenko V.I.2,3, Prikhod’ko I.Y.4
-
Affiliations:
- Physicotechnical Institute of Metals and Alloys
- Institute of Engineering Mechanics
- Ukrainian State Space Agency
- Institute of Ferrous Metallurgy
- Issue: Vol 48, No 8 (2018)
- Pages: 528-535
- Section: Article
- URL: https://ogarev-online.ru/0967-0912/article/view/180274
- DOI: https://doi.org/10.3103/S0967091218080090
- ID: 180274
Cite item
Open Access
Access granted
Subscription Access
Abstract
The sources of defects associated with stability loss of cold-rolled strip coils are established. The influence of the winding-drum structure in cold-rolling mills on the stress–strain state of the coils, both before and after removal from the winding system, is analyzed in detail. The possibility of modifying the stress–strain state of the coils by regulating the rigidity of the winding drum is considered. Recommendations are made regarding the selection of the winding technology for rolled strip.
Keywords
About the authors
V. L. Mazur
Physicotechnical Institute of Metals and Alloys
Author for correspondence.
Email: prof.vlm@ukr.net
Ukraine, Kiev, 03142
V. I. Timoshenko
Institute of Engineering Mechanics; Ukrainian State Space Agency
Email: prof.vlm@ukr.net
Ukraine, Dnepr, 49005; Dnepr
I. Yu. Prikhod’ko
Institute of Ferrous Metallurgy
Email: prof.vlm@ukr.net
Ukraine, Dnepr
Supplementary files
