Email this article 
Development of calibration samples made of steel 45 and 09G2S for eddy current structuroscope by carburizing
- Authors: Byzov A.V.1, Vasilenko O.N.1, Ksenofontov D.G.1, Minin M.G.2, Weinstein I.A.2
-
Affiliations:
- M.N. Mikheev Institute of Metal Physics of UB RAS
- Ural Federal University named after the first President of Russia B.N. Yeltsin
- Issue: No 8 (2024)
- Pages: 62-66
- Section: По материалам XXXV Уральской конференции «Физические методы неразрушающего контроля (Янусовские чтения)»
- URL: https://ogarev-online.ru/0130-3082/article/view/264031
- DOI: https://doi.org/10.31857/S0130308224080065
- ID: 264031
Cite item
Open Access
Access granted
Subscription Access
Abstract
The paper describes the process of carburizing and hardening of 45 and 09G2S steels for the production of samples for the development of a technique for eddy current testing of the quality and thickness of hardened layers on ferromagnetic cores. Structural analysis of samples in the initial state, in the hardened state, as well as after carburizing and hardening was carried out. As a result of metallographic studies it was obtained that the depth of the cemented layer of steel 45 was equal to 250 microns, and in case of steel 09G2C it is in the range of 550-800 microns.
About the authors
A. V. Byzov
M.N. Mikheev Institute of Metal Physics of UB RAS
Author for correspondence.
Email: byzovav@imp.uran.ru
Russian Federation, 620108, Yekaterinburg, st. Sof’I Kovalevskoy, 18
O. N. Vasilenko
M.N. Mikheev Institute of Metal Physics of UB RAS
Email: byzovav@imp.uran.ru
Russian Federation, 620108, Yekaterinburg, st. Sof’I Kovalevskoy, 18
D. G. Ksenofontov
M.N. Mikheev Institute of Metal Physics of UB RAS
Email: byzovav@imp.uran.ru
Russian Federation, 620108, Yekaterinburg, st. Sof’I Kovalevskoy, 18
M. G. Minin
Ural Federal University named after the first President of Russia B.N. Yeltsin
Email: m.g.minin@urfu.ru
Russian Federation, 620002, Yekaterinburg, st. Mira, 19
I. A. Weinstein
Ural Federal University named after the first President of Russia B.N. Yeltsin
Email: m.g.minin@urfu.ru
Russian Federation, 620002, Yekaterinburg, st. Mira, 19
References
- Maisuradze M.V., Ryzhkov M.A., Belikov S.V., Kornienko O.Y., Karabanalov M.S., Zhilyakov A.Yu. Cementation, nitrocementation and nitriding of steel products. Ekaterinburg: Ural University Publ., 2021. 102 p. (in Russian).
- State standard. 33439—2015. Metal products, ferrous metals and alloys on iron-nickel and nickel-based. Heat treatment terms and definitions. Moscow: Standardinform, 2016. 40 p. (In Russian).
- Baev A.R., Majorov A.I., Tishchenko M.A. Ultrasonic methods of analysis of the metal articles surface hardening // Foundry Production and Metallurgy. 2010. No. 4. P. 267—271.
- Bida G.V., Mikheev M.N., Kostin V.N. Determination of dimensions of an attachable electromagnet designed for nondestructive testing of depth and hardness of surface-hardened layers // Soviet Journal of Nondestructive Testing. 1984. No. 8. P. 10—16.
- Patent Russia, no. 2782884, 07.11.2022.
- Syayako M.V., Soloviev I.P., Solomenchuk P.V. Method of measuring the thickness of non-electrically conductive coating on non-magnetic electrically conductive base with automatic consideration of the influence of specific conductivity of the substrate // Defectoscopiya. 2023. No. 7. P. 58—60.
- Chernyshev A.V. Choosing of operating frequency of eddy current thickness meter with superimposed transducer // Devices and Methods of Measurements. 2014. No. 1. P. 73—78. (In Russian).
- Patent Russia, no. 2616071, 12.04.2017.
- Chernyshev A.V., Zagorskii I.E., Sharando V.I. Chromium plating thickness testing on nickel base by eddy current method. Modern methods and instruments of quality testing and diagnostics of objects’ condition. Mogilev, 2022.
- Critical points of steel. 2015. Available at: https://heattreatment-ru.com/kriticheskie-tochki-stali# (accessed 17.05.2024) (in Russian).
- Samohotsky A.I., Parfenovskaya N.G. Technology of heat treatment of metals. M.: Mashinostroenie, 1976. 311 p. (In Russian).
- Kossovich E.L., Borodich F.M. Epshtein S.A. Galanov B.A. Minin M.G. Prosina V.A. Mechanical, structural and scaling properties of coals: depth-sensing indentation studies // Applied physics A. 2019. V. 125. Is. 3. doi: 10.1007/s00339-018-2282-1
- Brusnitsyna E.V., Grokhovsky V.I., Minin M.G. Nanoindentation of different structures within the metallic part of the Seymchan pallasite pmg // Meteoritics & Planetary Science. 2016. V. 51. P. A184—A184.
Supplementary files
