Отправить статью по E-mail Combined Technology of Aluminum Alloy Vertical Casting and Simultaneous Deformation
- Авторы: Sergeeva A.M.1,2, Lovizin N.S.1, Sosnin A.A.1
-
Учреждения:
- Institute of Engineering and Metallurgy, Far Eat Branch of the Russian Academy of Sciences
- Institute of Scientific and Technical Innovation (Skolkovo Project participant)
- Выпуск: Том 62, № 3-4 (2018)
- Страницы: 270-274
- Раздел: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/241610
- DOI: https://doi.org/10.1007/s11015-018-0655-5
- ID: 241610
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Technology is developed combining continuous vertical casting of metals with simultaneous deformation, and the device operating principle and implementation of this technology are described. Data are provided for the design features and functioning of the device. Results of experimental studies of AD0 and D16 alloy billets are provided. It is shown that this technology makes it possible in a short production cycle to prepare long metal objects at a rate of 2 m/min. The blanks obtained exhibit a fine-grained structure with a grain size not exceeding 7 μm, and also increased hardness, inferior to the maximum possible by 23%.
Об авторах
A. Sergeeva
Institute of Engineering and Metallurgy, Far Eat Branch of the Russian Academy of Sciences; Institute of Scientific and Technical Innovation (Skolkovo Project participant)
Автор, ответственный за переписку.
Email: serg-nasty@mail.ru
Россия, Komsomolsk-on-Amur; Komsomolsk-on-Amur
N. Lovizin
Institute of Engineering and Metallurgy, Far Eat Branch of the Russian Academy of Sciences
Email: serg-nasty@mail.ru
Россия, Komsomolsk-on-Amur
A. Sosnin
Institute of Engineering and Metallurgy, Far Eat Branch of the Russian Academy of Sciences
Email: serg-nasty@mail.ru
Россия, Komsomolsk-on-Amur
Дополнительные файлы
