Enviar artigo por via de e-mail A Study of the Mechanical Properties of Railroad Wheels Manufactured from a Billet Broached in a Helical Rolling Mill
- Autores: Romanenko V.P.1, Fomin A.V.1, Sevast’yanov A.A.2, Nikulin A.N.3
-
Afiliações:
- Moscow Institute of Steel and Alloys (MISiS) National University of Science and Technology
- OAO Vyksunskii Metallurgicheskii Zavod [Vyksa Metallurgical Plant Open Joint-Stock Corporation]
- I. P. Bardin Central Scientific Research Institute for Ferrous Metallurgy Moscow
- Edição: Volume 62, Nº 5-6 (2018)
- Páginas: 568-573
- Seção: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/241975
- DOI: https://doi.org/10.1007/s11015-018-0694-y
- ID: 241975
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
We describe the results of a full-scale experiment in the fabrication of 957 mm diameter railroad wheels from a pre-formed hollow billet obtained by piercing a thick-walled sleeve with an ingot. We found that a 474 mm diameter steel wheel billet can be smoothly pierced using a rotary piercing mill. The process of forming hollow billets when mass-producing wheels in press-rolling equipment also remains stable. The mechanical specifications of railroad wheels fabricated from hollow billets meet regulatory requirements.
Sobre autores
V. Romanenko
Moscow Institute of Steel and Alloys (MISiS) National University of Science and Technology
Autor responsável pela correspondência
Email: romanenko-misis@yandex.ru
Rússia, Moscow
A. Fomin
Moscow Institute of Steel and Alloys (MISiS) National University of Science and Technology
Email: romanenko-misis@yandex.ru
Rússia, Moscow
A. Sevast’yanov
OAO Vyksunskii Metallurgicheskii Zavod [Vyksa Metallurgical Plant Open Joint-Stock Corporation]
Email: romanenko-misis@yandex.ru
Rússia, Vyksa
A. Nikulin
I. P. Bardin Central Scientific Research Institute for Ferrous Metallurgy Moscow
Email: romanenko-misis@yandex.ru
Rússia, Moscow
Arquivos suplementares
