Enviar artigo por via de e-mail Effect of Ferrite Content on High-Temperature Strength of 12% Chromium Steels with a Ferritic-Martensitic Structure
- Autores: Belomytsev M.Y.1, Obraztsov S.M.2, Molyarov A.V.1
-
Afiliações:
- National University of Science and Technology MISiS
- State Science Center of the Russian Federation – Leipunskii Institute for Physics and Power Engineering (GNTs RF – FEI)
- Edição: Volume 61, Nº 9-10 (2018)
- Páginas: 758-764
- Seção: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/240801
- DOI: https://doi.org/10.1007/s11015-018-0560-y
- ID: 240801
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The structure and mechanical properties of a number of experimental 12% chromium steels of the ferritic-martensitic class are studied, whose prototypes are two domestic heat-resistant steels EP-450 (12Kh12М2BFR) and EP-823 (16Kh12МVSFBR). The possibility is demonstrated of using isothermal hardening for controlling the quantitative ratio of martensite and ferrite in test steel structure, characterized by considerable austenite thermal stability. It is established that ferrite content in the original steel structure has a specific unfavorable effect on high-temperature strength.
Sobre autores
M. Belomytsev
National University of Science and Technology MISiS
Autor responsável pela correspondência
Email: myubelom@yandex.ru
Rússia, Moscow
S. Obraztsov
State Science Center of the Russian Federation – Leipunskii Institute for Physics and Power Engineering (GNTs RF – FEI)
Email: myubelom@yandex.ru
Rússia, Obninsk
A. Molyarov
National University of Science and Technology MISiS
Email: myubelom@yandex.ru
Rússia, Moscow
Arquivos suplementares
