Email this article Microstructural Condition Features of High-Strength Steels for Large Diameter Pipes
- Authors: Mentyukov K.Y.1, Bortsov A.N.1, Makushev S.Y.1, Shabalov I.P.1, Lipunov Y.I.2, Sychev O.N.3
-
Affiliations:
- Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
- Research Institute of Metallurgical Heat Engineering (VNIIMT)
- Severstal Management
- Issue: Vol 61, No 1-2 (2017)
- Pages: 32-39
- Section: Article
- URL: https://ogarev-online.ru/0026-0894/article/view/239869
- DOI: https://doi.org/10.1007/s11015-017-0450-8
- ID: 239869
Cite item
Open Access
Access granted
Subscription Access
Abstract
Results are given for analysis of cooling rolled plate after the last pass in a mill up to the instant of cooling to 200°C. Calculations are provided for controlled cooling for four thickness of rolled plate of steel of strength class K65 (X80). Precision x-ray diffraction is used for quantitative and qualitative study of the microstructure obtained in rolled product.
About the authors
K. Yu. Mentyukov
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Author for correspondence.
Email: kmentyukov@gmail.com
Russian Federation, Moscow
A. N. Bortsov
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: kmentyukov@gmail.com
Russian Federation, Moscow
S. Yu. Makushev
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: kmentyukov@gmail.com
Russian Federation, Moscow
I. P. Shabalov
Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)
Email: kmentyukov@gmail.com
Russian Federation, Moscow
Yu. I. Lipunov
Research Institute of Metallurgical Heat Engineering (VNIIMT)
Email: kmentyukov@gmail.com
Russian Federation, Ekaterinberg
O. N. Sychev
Severstal Management
Email: kmentyukov@gmail.com
Russian Federation, St. Petersburg
Supplementary files
