Use of Glow Discharge Nitriding for Raising the Surface Hardness of Bearing Parts from Precision Nickel Alloys
- Авторы: Semenov M.Y.1, Kai J.D.1, Smirnov A.E.1, Shevchenko S.Y.1, Aleksandrov V.A.2
-
Учреждения:
- N. É. Bauman Moscow State Technical University
- Moscow Automobile and Road Construction State Technical University (MADI)
- Выпуск: Том 61, № 3-4 (2019)
- Страницы: 173-177
- Раздел: Surface Engineering
- URL: https://ogarev-online.ru/0026-0673/article/view/236581
- DOI: https://doi.org/10.1007/s11041-019-00396-0
- ID: 236581
Цитировать
Аннотация
Precision nickel alloy 40KhNYu-VI used for fabricating nonmagnetic precision bearings is studied after nitriding in glow discharge in an experimental facility at a high temperature (730 and 900°C) and in commercial equipment at 540°C. The effect of the temperature and duration of nitriding and of the mode of heat treatment on the structure and hardness of the surface layer obtained is determined.
Об авторах
M. Semenov
N. É. Bauman Moscow State Technical University
Автор, ответственный за переписку.
Email: semenov.m.yu@bmstu.ru
Россия, Moscow
Jian Kai
N. É. Bauman Moscow State Technical University
Email: semenov.m.yu@bmstu.ru
Россия, Moscow
A. Smirnov
N. É. Bauman Moscow State Technical University
Email: semenov.m.yu@bmstu.ru
Россия, Moscow
S. Shevchenko
N. É. Bauman Moscow State Technical University
Email: semenov.m.yu@bmstu.ru
Россия, Moscow
V. Aleksandrov
Moscow Automobile and Road Construction State Technical University (MADI)
Email: semenov.m.yu@bmstu.ru
Россия, Moscow
Дополнительные файлы
