Отправить статью по E-mail Dry Sliding Wear Characteristics of Plasma-Nitrocarburized Co – Cr – Mo Alloy
- Авторы: Bayrak Ö.1, Kovaci H.2, Yildiz F.3, Yetim A.F.3, Çelik A.2
-
Учреждения:
- Erzincan University, Department of Mechanical Engineering
- Ataturk University, Department of Mechanical Engineering
- Erzurum Technical University, Department of Mechanical Engineering
- Выпуск: Том 58, № 11-12 (2017)
- Страницы: 742-747
- Раздел: Technical Information
- URL: https://ogarev-online.ru/0026-0673/article/view/236108
- DOI: https://doi.org/10.1007/s11041-017-0089-x
- ID: 236108
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Forged low-carbon alloy Co – 27% Cr – 6% Mo – 0.06% C is studied after 2-h plasma nitrocarburizing in a gaseous mixture of 10% CO2 + 20% N2 + 70% H2 at 400, 500 and 600°C. The surface layer and the core are studied by diffractometric analysis and scanning electron microscopy. The microhardness and the tribological characteristics of the alloy are determined. The effect of the temperature of nitrocarburizing on the wear resistance, surface roughness and friction coefficient of the alloy is considered.
Об авторах
Ö. Bayrak
Erzincan University, Department of Mechanical Engineering
Автор, ответственный за переписку.
Email: obayrak@erzincan.edu.tr
Турция, Erzincan
H. Kovaci
Ataturk University, Department of Mechanical Engineering
Email: obayrak@erzincan.edu.tr
Турция, Erzurum
F. Yildiz
Erzurum Technical University, Department of Mechanical Engineering
Email: obayrak@erzincan.edu.tr
Турция, Erzurum
A. Yetim
Erzurum Technical University, Department of Mechanical Engineering
Email: obayrak@erzincan.edu.tr
Турция, Erzurum
A. Çelik
Ataturk University, Department of Mechanical Engineering
Email: obayrak@erzincan.edu.tr
Турция, Erzurum
Дополнительные файлы
