An indirectly heated metal oxide hot cathode with a 100-cm 2  area

M. M. Ivanov; V. I. Karelin; V. V. Gorokhov; V. A. Chernyshov; I. V. Filatov; M. A. Ignatov; P. A. Tsitsilin; A. M. Sokolov; N. M. Galina; V. I. Yudanov

doi:10.1134/S0020441216010048

An indirectly heated metal oxide hot cathode with a 100-cm² area

Autores: Ivanov M.M.¹, Karelin V.I.¹, Gorokhov V.V.¹, Chernyshov V.A.¹, Filatov I.V.¹, Ignatov M.A.¹, Tsitsilin P.A.¹, Sokolov A.M.², Galina N.M.², Yudanov V.I.²
Afiliações:
1. Russian Federal Nuclear Center
2. Shokin AO NPP Istok
Edição: Volume 59, Nº 1 (2016)
Páginas: 136-138
Seção: Laboratory Techniques
URL: https://ogarev-online.ru/0020-4412/article/view/158920
DOI: https://doi.org/10.1134/S0020441216010048
ID: 158920

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

Results of designing of a sectioned metal oxide hot cathode with indirect heating and a total emission coating area of 100 cm² are described. The design of the hot cathode enables control of the working surface temperature and allows one to change emission surface without replacing the whole hot cathode. The thermal test results are presented. The possibility is shown of applying the hot cathode in the uncharacteristic mode of gas discharge formation in medium vacuum conditions.