Measurement of Kinematic and Thermal Characteristics of High-Speed Gas-Dynamic Processes by Means of Microwave Sounding


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The paper describes a method of simultaneous measurements of kinematic parameters of a high-speed process by a microwave radio interferometer with a 3-mm range of wavelengths and the brightness temperature of the same process by the microwave radio interferometer operating in the radiometer mode. The methods of radiometer calibration and analysis of radiometric data are described. Results of experimental investigations are reported by an example of measuring the detonation velocity and estimating the brightness temperature of the detonation front in TNT.

Sobre autores

E. Botov

Institute of Experimental Physics (VNIIEF)

Autor responsável pela correspondência
Email: anatolich-sedov@yandex.ru
Rússia, Sarov, 607188

V. Ikonnikov

Lobachevskii State University of Nizhnii Novgorod

Email: anatolich-sedov@yandex.ru
Rússia, Nizhnii Novgorod, 603098

V. Kanakov

Lobachevskii State University of Nizhnii Novgorod

Email: anatolich-sedov@yandex.ru
Rússia, Nizhnii Novgorod, 603098

N. Kornev

Sedakov Institute of Measuring Systems

Email: anatolich-sedov@yandex.ru
Rússia, Nizhnii Novgorod, 603137

K. Mineev

Sedakov Institute of Measuring Systems

Email: anatolich-sedov@yandex.ru
Rússia, Nizhnii Novgorod, 603137

A. Nazarov

Sedakov Institute of Measuring Systems

Email: anatolich-sedov@yandex.ru
Rússia, Nizhnii Novgorod, 603137

A. Sedov

Institute of Experimental Physics (VNIIEF)

Email: anatolich-sedov@yandex.ru
Rússia, Sarov, 607188

A. Shalygin

Institute of Experimental Physics (VNIIEF)

Email: anatolich-sedov@yandex.ru
Rússia, Sarov, 607188

E. Mitin

Institute of Experimental Physics (VNIIEF)

Email: anatolich-sedov@yandex.ru
Rússia, Sarov, 607188

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2018