Enviar artigo por via de e-mail Technical Means of Maintaining Wells on a Set Route
- Autores: Karmanov T.D.1, Kaliev B.Z.1, Nugumanov K.K.1, Chelpanov I.B.2, Kochetkov A.V.3
-
Afiliações:
- Satpaev Kazakh National Technical University
- State Research Center of the Russian Federation – Concern CSRI Elektropribor (TsNII Elektropribor)
- Perm National Research Polytechnic University
- Edição: Volume 52, Nº 7-8 (2016)
- Páginas: 578-581
- Seção: Information
- URL: https://ogarev-online.ru/0009-2355/article/view/234957
- DOI: https://doi.org/10.1007/s10556-016-0236-z
- ID: 234957
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A continuous-acting whipstock with hydromechanical working body by means of which the deviation from a set route may be substantially reduced in the process of drilling wells is developed.
Palavras-chave
Sobre autores
T. Karmanov
Satpaev Kazakh National Technical University
Email: bakaliev@mail.ru
Cazaquistão, Almaty
B. Kaliev
Satpaev Kazakh National Technical University
Autor responsável pela correspondência
Email: bakaliev@mail.ru
Cazaquistão, Almaty
K. Nugumanov
Satpaev Kazakh National Technical University
Email: bakaliev@mail.ru
Cazaquistão, Almaty
I. Chelpanov
State Research Center of the Russian Federation – Concern CSRI Elektropribor (TsNII Elektropribor)
Email: bakaliev@mail.ru
Rússia, St. Petersburg
A. Kochetkov
Perm National Research Polytechnic University
Email: bakaliev@mail.ru
Rússia, Perm
Arquivos suplementares
