Email this article Development of a Desublimator Design
- Authors: Rusakov I.Y.1, Molokov P.B.1, Buinovskii A.S.1, Sofronov V.L.1, Brendakov V.N.1
-
Affiliations:
- Seversk Institute of Technology, Branch of National Research Nuclear University MEPhI
- Issue: Vol 53, No 1-2 (2017)
- Pages: 89-93
- Section: Article
- URL: https://ogarev-online.ru/0009-2355/article/view/235376
- DOI: https://doi.org/10.1007/s10556-017-0300-3
- ID: 235376
Cite item
Open Access
Access granted
Subscription Access
Abstract
A design for a new desublimator with a warm wall allowing desublimation of up to 98% of uranium hexafluoride from a gas–vapor mixture with up to 90% of the theoretical desublimator filling was proposed. The desublimator was calculated, produced, and tested on a real industrial product.
About the authors
I. Yu. Rusakov
Seversk Institute of Technology, Branch of National Research Nuclear University MEPhI
Author for correspondence.
Email: IYRusakov@mephi.ru
Russian Federation, Seversk
P. B. Molokov
Seversk Institute of Technology, Branch of National Research Nuclear University MEPhI
Email: IYRusakov@mephi.ru
Russian Federation, Seversk
A. S. Buinovskii
Seversk Institute of Technology, Branch of National Research Nuclear University MEPhI
Email: IYRusakov@mephi.ru
Russian Federation, Seversk
V. L. Sofronov
Seversk Institute of Technology, Branch of National Research Nuclear University MEPhI
Email: IYRusakov@mephi.ru
Russian Federation, Seversk
V. N. Brendakov
Seversk Institute of Technology, Branch of National Research Nuclear University MEPhI
Email: IYRusakov@mephi.ru
Russian Federation, Seversk
Supplementary files
